[asterisk-users] Help Needed: Can't make "local" calls on a brand new PRI

Andrew Latham lathama at lathama.com
Fri Mar 2 07:15:06 MST 2007


Telco Switching could be waiting for a ten digit number.  I know that
Sprint and some others expect ten digit local calls....


On 2/28/07, Mark Engelhardt <marke at intuitiveengineering.com> wrote:
> Hello,
>
> I just installed a PRI and when I make a local (seven digit) call, I
> get Code 28 back from the telco, (I believe code 28 means "Invalid
> Number") and I hear a fast busy on the phone.
>
> Here is the output:
>      -- Executing Dial("SIP/marke-17b1", "ZAP/G1/4967171") in new stack
>      -- Requested transfer capability: 0x00 - SPEECH
>      -- Called G1/4967171
>      -- Zap/23-1 is proceeding passing it to SIP/marke-17b1
>      -- PROGRESS with cause code 28 received
>      -- Zap/23-1 is making progress passing it to SIP/marke-17b1
>
> As you can see, asterisk is reporting 4967171 as the dialed number
> (which is valid)
>
> When I dial long distance, everything works fine.
>
> Here is the output from long distance...
>
>      -- Executing Set("SIP/marke-80f8", "CALLERID(all)=Small Dog
> Electronics<8005116277>") in new stack
>      -- Executing Dial("SIP/marke-80f8", "ZAP/G1/17077510895") in new
> stack
>      -- Requested transfer capability: 0x00 - SPEECH
>      -- Called G1/17077510895
>      -- Zap/23-1 is proceeding passing it to SIP/marke-80f8
>      -- Zap/23-1 is ringing
>
> If I just send the full 18024967171 to the telco, I get a voice from
> the telco saying it is not necessary to dial 1 or the area code when
> calling this number.
>
> So the questions:  Is there anyway to further verify that asterisk is
> not sending any extra digits or filler digits to the telco on the PRI?
> If the problem is not in asterisk or zaptel, what do I say to the
> Telco to get them to believe the problem is on their end?
>
> We are running:
> Asterisk 1.2.6
> Zaptel 1.2.14
> TE110P Card
>
> Mark Engelhardt
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
---
Andrew Latham - AKA: LATHAMA (lay-th-ham-eh)
lathama at lathama.com - lathama at gmail.com
If any of the above are down we have bigger problems than my email!
Hind sight is most always 20/20 or better.
---


More information about the asterisk-users mailing list