[asterisk-users] No Caller ID Name PRI NI2
Webster, Andrew
awebster at connectalk.com
Fri Mar 2 06:30:42 MST 2007
>
> What do you mean by outbound CallerID Name? So that when calling a
> POTS with CallerID service from telco the Name should show up as you
> send it?
> If the answer to the above is yes, then stop trying to do that. It
> won't work, as the name that the POTS subscriber sees is NOT the one
> you send, but what the provider of that POTS line sees when the do the
> lookup on the name that is listed (usualy) with the number received as
> callerid.
>
Ah, that clarifies things a bit. So I have to tell my telco what I want
to have show up for each callerID number that I send?
> On 2/28/07, foucaulom at infofortin.com <foucaulom at infofortin.com> wrote:
> > I there,
> >
> > I have some trouble to do working caller id name for outgoing calls
on
> > the PRI we just installed. Caller id name work on incoming calls
only.
> > Caller id number work on incoming and outgoing calls.
> >
> >
> > The provider, Goup Telecom, said that's in what i'm sending. They
said
> > that I send the cid name in ascii code and to do it working, I need
to
> > send it in hex.
> >
> > So I take some traces but i'm unable to figure where is the problem.
> >
> > What I see In case that work: incoming call:
> > < [1c 1c 9f 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f
52
> > 54 49 4e 20 46 41 58]
> > < Facility (len=30, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x16,
> > 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0E, 'INFOFORTIN FAX' ]
> > PROTOCOL 1F
> >
> > What I see in case that doesn't work: outgoing call:
> > > [28 05 b1 69 6e 66 6f]
> > > Display (len= 5) Charset: 31 [ info ]........
> >
> >
> > completes traces:
> >
> > working:
> > < [ 02 01 da d6 08 02 02 34 05 04 03 80 90 a2 18 03 a9 83 81 1c 1c
9f
> > 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f 52 54 49 4e
20
> > 46 41 58 1e 02 82 83 6c 0c 21 83 38 31 39 37 38 30 31 32 37 33 70 0b
a1
> > 38 31 39 33 34 30 30 39 37 37 ]
> > < Informational frame:
> > < SAPI: 00 C/R: 1 EA: 0
> > < TEI: 000 EA: 1
> > < N(S): 109 0: 0
> > < N(R): 107 P: 0
> > < 76 bytes of data
> > -- ACKing all packets from 106 to (but not including) 107
> > -- Since there was nothing left, stopping T200 counter
> > -- Stopping T203 counter since we got an ACK
> > -- Nothing left, starting T203 counter
> > < Protocol Discriminator: Q.931 (8) len=76
> > < Call Ref: len= 2 (reference 564/0x234) (Originator)
> > < Message type: SETUP (5)
> > < [04 03 80 90 a2]
> > < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> > capability: Speech (0)
> > < Ext: 1 Trans mode/rate: 64kbps,
> > circuit-mode (16)
> > < Ext: 1 User information layer 1:
u-Law
> (34)
> > < [18 03 a9 83 81]
> > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> > Exclusive Dchan: 0
> > < ChanSel: Reserved
> > < Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> > < Ext: 1 Channel: 1 ]
> > < [1c 1c 9f 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f
52
> > 54 49 4e 20 46 41 58]
> > < Facility (len=30, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x16,
> > 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0E, 'INFOFORTIN FAX' ]
> > PROTOCOL 1F
> > 8B 0001 00 (CONTEXT SPECIFIC [11])
> > A1 0016 (CONTEXT SPECIFIC [1])
> > 02 0001 01 (INTEGER: 1)
> > 02 0001 00 (INTEGER: 0)
> > 80 000E 49 4E 46 4F 46 4F 52 54 49 4E 20 46 41 58 (CONTEXT
SPECIFIC
> [0])
> > < [1e 02 82 83]
> > < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
> > (0) 0: 0 Location: Public network serving the local user (2)
> > < Ext: 1 Progress Description:
Calling
> > equipment is non-ISDN. (3) ]
> > < [6c 0c 21 83 38 31 39 37 38 30 31 32 37 33]
> > < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
> > ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> > < Presentation: Presentation allowed of
> > network provided number (3) '8197801273' ]
> > < [70 0b a1 38 31 39 33 34 30 30 39 37 37]
> > < Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI:
> > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8193400977' ]
> > -- Making new call for cr 564
> > -- Processing Q.931 Call Setup
> > -- Processing IE 4 (cs0, Bearer Capability)
> > -- Processing IE 24 (cs0, Channel Identification)
> > -- Processing IE 28 (cs0, Facility)
> > Q.932 Interpretation component is not handled
> > Handle Q.932 ROSE Invoke component
> > [ Handling operation 0 ]
> > Handle Name display operation
> > Received caller name 'INFOFORTIN FAX'
> > -- Processing IE 30 (cs0, Progress Indicator)
> > -- Processing IE 108 (cs0, Calling Party Number)
> > -- Processing IE 112 (cs0, Called Party Number)
> > q931.c:3294 q931_receive: call 564 on channel 1 enters state 6 (Call
> Present)
> > Sending Receiver Ready (110)
> > > [ 02 01 01 dc ]
> > > Supervisory frame:
> > > SAPI: 00 C/R: 1 EA: 0
> > > TEI: 000 EA: 1
> > > Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> > > N(R): 110 P/F: 0
> > > 0 bytes of data
> > -- Restarting T203 counter
> > -- Restarting T203 counter
> > q931.c:2570 q931_call_proceeding: call 564 on channel 1 enters state
9
> > (Incoming Call Proceeding)
> > > [ 00 01 d6 dc 08 02 82 34 02 18 03 a9 83 81 ]
> > > Informational frame:
> > > SAPI: 00 C/R: 0 EA: 0
> > > TEI: 000 EA: 1
> > > N(S): 107 0: 0
> > > N(R): 110 P: 0
> > > 10 bytes of data
> > -- Restarting T203 counter
> > Stopping T_203 timer
> > Starting T_200 timer
> > > Protocol Discriminator: Q.931 (8) len=10
> > > Call Ref: len= 2 (reference 564/0x234) (Terminator)
> > > Message type: CALL PROCEEDING (2)
> > > [18 03 a9 83 81]
> >
> >
> >
> > don't working:
> >
> > -- Restarting T203 counter
> > Stopping T_203 timer
> > Starting T_200 timer
> > > Protocol Discriminator: Q.931 (8) len=54
> > > Call Ref: len= 2 (reference 13/0xD) (Originator)
> > > Message type: SETUP (5)
> > > [04 03 80 90 a2]
> > > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> > > capability: Speech (0)
> > > Ext: 1 Trans mode/rate: 64kbps,
> > > circuit-mode (16)
> > > Ext: 1 User information layer 1:
u-Law
> (34)
> > > [18 03 a9 83 81]
> > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> > > Exclusive Dchan: 0
> > > ChanSel: Reserved
> > > Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> > > Ext: 1 Channel: 1 ]
> > > [1e 02 80 83]
> > > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
> > > (0) 0: 0 Location: User (0)
> > > Ext: 1 Progress Description:
Calling
> > > equipment is non-ISDN. (3) ]
> > > [28 05 b1 69 6e 66 6f]
> > > Display (len= 5) Charset: 31 [ info ]
> > > [6c 0d 21 80 31 38 31 39 33 34 30 33 31 32 38]
> > > Calling Number (len=15) [ Ext: 0 TON: National Number (2) NPI:
> > > ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> > > Presentation: Presentation permitted,
user
> > > number not screened (0) '18193403128' ]
> > > [70 0b a1 38 31 39 35 37 33 30 39 31 33]
> > > Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI:
> > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8195730913' ]
> > q931.c:2879 q931_setup: call 32781 on channel 1 enters state 1 (Call
> > Initiated)
> >
> >
> > Anyone had suggestion/comment welcome.
> >
> > Thank you ad advance,
> >
> > Loic
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list