[asterisk-users] TDM400p Loaded only once

[Il Neofita]

Hi
when I turn on my PC I able to load the drivers and start my card,
if I reboot the PC I have the following error

ztcfg -vvv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

4 channels configured.

ZT_CHANCONFIG failed on channel 1: No such device or address (6)

This is part of my dmesg
audit(1172747900.510:5): avc:  denied  { net_bind_service } for  pid=1657
comm="hidd" capability=10 scontext=system_u:system_r:bluetooth_t:s0
tcontext=system_u:system_r:bluetooth_t:s0 tclass=capability
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[drm] Initialized r128 2.5.0 20030725 on minor 0
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
audit(1172747921.184:6): avc:  denied  { getattr } for  pid=2323
comm="pam_console_app" name="card0" dev=tmpfs ino=7969
scontext=system_u:system_r:pam_console_t:s0-s0:c0.c255tcontext=system_u:object_r:device_t:s0
tclass=chr_file
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.2.14
Zaptel Echo Canceller: KB1

and finally this is my configuration
fxsks=1-4
loadzone=us
defaultzone=us
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070301/6cf06c55/attachment.htm