[asterisk-users] Fwd: Problems with zap following 1.4.6 install

[hugolivude]

Figured it out.

I forgot that /etc/zaptel.conf got clobbered during the install.  Once
I fixed that and ran:

/sbin/ztcfg -vvvv

It worked.   Zaptel.conf looks like this:

loadzone = us
defaultzone=us
fxoks = 1-2
fxsks = 4

I have 1 FXO module & 2 FXS modules.

Thanks for putting me on the right track!!

H

On 6/30/07, hugolivude <hugolivude at gmail.com> wrote:
> Thanks for responding Russell!
>
> > What output do you get if you run "module unload chan_zap.so"
>
>  == Unregistered application 'ZapSendKeypadFacility'
>
> > and then "module load chan_zap.so" ?
>
>   == Registered application 'ZapSendKeypadFacility'
>   == Parsing '/etc/asterisk/zapata.conf': Found
> [Jun 30 07:46:51] WARNING[12132]: chan_zap.c:903 zt_open: Unable to
> specify channel 1: No such device or address
> [Jun 30 07:46:51] ERROR[12132]: chan_zap.c:7157 mkintf: Unable to open
> channel 1: No such device or address
> here = 0, tmp->channel = 1, channel = 1
> [Jun 30 07:46:51] ERROR[12132]: chan_zap.c:10463 build_channels:
> Unable to register channel '1'
>
> Hopefully you'll be able to tell me what the above means!  I'm using
> the same zapata.comf that I used with 1.2...
>
> Thanks,
> H
>