[asterisk-users] Kirk IP600 V3 DECT Wireless server

[Garth van Sittert]

Hi Remco

I have used the IP600 v3 with SIP support on Asterisk... apparently I 
was the 1st person globally to run it at a site.  The 1st firmware was a 
bit buggy at times, but seems to be much better on the later versions.

Kind Regards
Garth

Garth van Sittert
BSc (Physics & Computer Science)
-----------------
Mobile: +27 (0)83 791 6662
Email:  garth at bitco.co.za
Phone:  08600 BITCO
MSN:	garthvs at hotmail.com
Web:    www.bitco.co.za



Remco Barendse wrote:
> Hi list!
>
> Does anyone have experiences with the updated model of the Kirk IP600?  
> The V3 model is supposed to support SIP instead of only SCCP or H323 which 
> would make the use with Asterisk a lot easier.
>
> I have only tested the Kirk IP600 V2 with SCCP / Skinny protocol which is 
> still giving me severe headaches :
>
> - the standard  Skinny driver in * doesn't work, only the version of 
> Sergio Chersovani is working but with some stability problems
> - audible echo
> - i have 2 kirk handsets and 2 Siemens handsets, the first 2 Kirk handsets 
> always ring on an incoming call, the Siemens handsets only sometimes ring 
> (don't know if this is caused by a problem in the SCCP driver or poor 
> support of the IP600 for non-Kirk phones??)
>
> Because of my earlier experiences I am hesitating to try the V3 version.
>
> Experiences anyone?
>
> Thanks!
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>