[asterisk-users] Que on A2Billing

[Nitesh Divecha]

2486543210 is my SIP-Friend which I created manually and associated with 
one of the card number.
My ATA is registered to Asterisk using the about DID Number.
So I want when I call the above number, it should ring on the ATA.
When I call from my cell to the above DID, it hits on the Asterisk and I 
see A2Billing trying to call SIP/2486543210, but it fails because 
Asterisk says "Unable to create channel of type 'SIP' (cause 3 - No 
route to destination) ".

Any suggestion...

Cheers,
Nitesh





Guillermo Salas M. wrote:
> On Fri, 2007-06-15 at 17:01 -0400, Nitesh Divecha wrote:
>   
>> Thanks man... That really helped me to move couple of steps. Now I see
>> the incoming calls are going in proper direction... I know I am still
>> missing a small piece here... I did ADD the Destination as a
>> SIP/2486543210, assigned the card number, enabled VOIP_CALL, and
>> enabled Active. 
>>
>>     
>
>
> 2486543210 is your card number?
>
>
>   
>> When I dial the DID number, on the *CLI it shows the following: -
>>
>> a2billing.php|1|did: bug
>>     -- AGI Script Executing Application: (DIAL) Options:
>> (SIP/2486543210|60|HL(3600000:61000:30000))
>>     -- Limit Data for this call: 
>>     -- - timelimit     = 3600000
>>     -- - play_warning  = 61000
>>     -- - play_to_caller= yes
>>     -- - play_to_callee= no
>>     -- - warning_freq  = 30000
>>     -- - start_sound   = UNDEF
>>     -- - warning_sound = timeleft 
>>     -- - end_sound     = UNDEF
>> Destroying call '0e6e480117744f926cea9bcd6bb47104 at 69.134.49.17'
>> Jun 15 16:41:34 NOTICE[15346]: app_dial.c:1069 dial_exec_full: Unable
>> to create channel of type 'SIP' (cause 3 - No route to destination) 
>>   == Everyone is busy/congested at this time (1:0/0/1)
>>
>>     
>
> I think that 2486543210 is not a customer, card number or SIP/IAX2
> friend, maybe is PSTN number. To redirect the call to any PSTN number
> you must need to set "voip call" to inactive and set the destination
> number to 2486543210.
>
>
>   
>> I bet I am missing something in extension.conf correct? I dont see any
>> examples in my package.
>>
>>     
>
>
> The context is fine don't worry about it.
>
>
>   
>> Any suggestion... Thanks once again... 
>>     
>
>
> Regards,
>
>