[asterisk-users] problem starting asterisk, unable to load chan_zap

Sebastian Reitenbach sebastia at l00-bugdead-prods.de
Wed Jun 13 06:16:57 CDT 2007


Hi all,

I am running asterisk 1.2.18, zaptel 1.2.18, libpri 1.2.4. on a suse 10.2, 
running kernel 2.6.18.2-34-default.

The zaptel drivers are loaded on boot via /etc/init.d/zaptel, but Asterisk 
is unable to start. It ends with the following message:
 [chan_zap.so] => (Zapata Telephony w/PRI)

Jun 13 13:05:41 VERBOSE[3356] logger.c:   == 
Parsing '/etc/asterisk/zapata.conf': Found
Jun 13 13:05:41 WARNING[3356] chan_zap.c: Unable to specify channel 1: No 
such device or address
Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to open channel 1: No such 
device or address
here = 0, tmp->channel = 1, channel = 1
Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to register channel '1-15'
Jun 13 13:05:41 WARNING[3356] loader.c: chan_zap.so: load_module failed, 
returning -1
Jun 13 13:05:41 DEBUG[3356] channel.c: Unregistering channel type 'Zap'
Jun 13 13:05:41 WARNING[3356] loader.c: Loading module chan_zap.so failed!


I checked that the module wcte11xp is loaded before I start asterisk. I can 
fix the problem when I do: 
rmmod wcte11xp && modprobe wcte11xp
after that rmmod && modprobe asterisk works. The same happens, on a similar 
machine, the only difference is that I need to load the wcte12xp driver, 
because of an other card.

Anybody knows what my problem is?

kind regards
Sebastian



More information about the asterisk-users mailing list