[asterisk-users] Bridged PRI calls - processor involvement?

Steve Hanselman SteveH at brendata.co.uk
Mon Jun 11 03:21:21 CDT 2007


Hi Steve,

No, nothing like that, it has various updated from an 8mb Internet link
and that's about it, I feel now that it's more down to disk I/O with the
mpt driver than network.

Steve


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve
Totaro
Sent: 09 June 2007 13:03
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] Bridged PRI calls - processor involvement?

Are you running recording on your box or FTPing large recording files or
PDFs or anything other than just voice traffic?  Has voice traffic
spiked in conjunction with your problems?

Are you doing any kind of port monitoring/mirroring on your switch?
Most people look at the 100mb or 1Gb figure but there is also another
very important spec to look at when evaluating a switch.  It is Frame
Forwarding Rate measured by Mpps.  Take a look at your switch's docs and
let us know what your FFR is and if you are doing any mirroring or link
aggregation.

Thanks,
Steve Totaro
http://www.asteriskhelpdesk.com
KB3OPB
 

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Steve Hanselman
> Sent: Friday, June 08, 2007 12:23 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [asterisk-users] Bridged PRI calls - processor
involvement?
> 
> It probably did but we run in updates every week and nobody can state
> exactly when the problem started only "a few weeks ago" - not very
> helpful.
> 
> I can see that when I hear the issue the iowait time is high on the
> processor.
> 
> Steve
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Matthew
> Fredrickson
> Sent: 08 June 2007 15:43
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Bridged PRI calls - processor
involvement?
> 
> Did it accompany an update you made?  If you can find out what version
> the problem started occurring, that would help in fixing the problem.
> 
> Matthew Fredrickson
> Software/Hardware Engineer
> Digium, Inc.
> 
> On Jun 8, 2007, at 2:59 AM, Steve Hanselman wrote:
> 
> > The setup.
> >
> > Asterisk is on a 3G Zeon Dell 2850 running Fedora Core 5/6 (all yum
> > updates applied), the TE410 lives on it's own interrupt.
> > Asterisk sits between our telco and a PRI enabled PBX.
> > These are the relevant versions installed:
> >
> > Linux: 2.6.20-1.2316.fc5smp
> > Zaptel: 1:1.4.2.1-34.fc5
> > Asterisk: 1:1.4.0-34.fc5.at
> > Libpri: 1:1.4.0-16.fc5.at
> > Wildcard details:
> > Found TE4XXP at base address fe3ffc00, remapped to f88bec00
> > TE4XXP version c01a016a, burst OFF, slip debug: OFF
> > Octasic optimized!
> > FALC version: 00000005, Board ID: 00
> > Reg 0: 0x377bb400
> > Reg 1: 0x377bb000
> > Reg 2: 0xffffffff
> > Reg 3: 0x00000000
> > Reg 4: 0x00000001
> > Reg 5: 0x00000000
> > Reg 6: 0xc01a016a
> > Reg 7: 0x00001f00
> > Reg 8: 0x00000000
> > Reg 9: 0x00ff0000
> > Reg 10: 0x0000004a
> > TTE4XXP: Launching card: 0
> > TE4XXP: Setting up global serial parameters
> > Found a Wildcard: Wildcard TE410P (3rd Gen)
> > TE4XXP: Span 1 configured for CCS/HDB3/CRC4
> > TE4XXP: Span 2 configured for CCS/HDB3/CRC4
> >
> >
> >
> > The problem:
> >
> > At random points during calls we lose 1-3 seconds of speech (both
ways
> > both callee and caller), this can be replicated (or at least a very
> > good
> > approximation!) by generating a high level of interrupt/cpu activity
> > (for instance copying data from a USB caddy as we tried the other
day
> > in
> > an attempt to reproduce this more reliably).
> >
> > The calls are bridged PRI:PRI calls, no VOIP involvement.
> >
> > This was not a problem until approx 3-4 weeks ago, but I can't tie
it
> > down to an exact date.
> >
> > Steve
> >
> >
> >> Interrupt sharing is not a problem anymore with those cards.  What
> >> version of zaptel did you try installing?  Can you explain more
about
> >> your problems?  Also, your configuration and setup would help out
as
> >> well.
> >>
> >> ---
> >> Matthew Fredrickson
> >> Digium, Inc.
> >
> >
> > The information contained in this email is intended for the personal
> > and confidential use
> > of the addressee only. It may also be privileged information. If you
> > are not the intended
> > recipient then you are hereby notified that you have received this
> > document in error and
> > that any review, distribution or copying of this document is
strictly
> > prohibited. If you have
> > received  this communication in error, please notify Brendata
> > immediately on:
> >
> > +44 (0)1268 466100, or email 'technical at brendata.co.uk'
> >
> > Brendata (UK) Ltd
> > Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
> > Registered Office as above. Registered in England No. 2764339
> >
> > See our current vacancies at www.brendata.co.uk
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> The information contained in this email is intended for the personal
and
> confidential use
> of the addressee only. It may also be privileged information. If you
are
> not the intended
> recipient then you are hereby notified that you have received this
> document in error and
> that any review, distribution or copying of this document is strictly
> prohibited. If you have
> received  this communication in error, please notify Brendata
immediately
> on:
> 
> +44 (0)1268 466100, or email 'technical at brendata.co.uk'
> 
> Brendata (UK) Ltd
> Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
> Registered Office as above. Registered in England No. 2764339
> 
> See our current vacancies at www.brendata.co.uk
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


The information contained in this email is intended for the personal and confidential use
of the addressee only. It may also be privileged information. If you are not the intended
recipient then you are hereby notified that you have received this document in error and
that any review, distribution or copying of this document is strictly prohibited. If you have 
received  this communication in error, please notify Brendata immediately on: 

+44 (0)1268 466100, or email 'technical at brendata.co.uk' 

Brendata (UK) Ltd
Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
Registered Office as above. Registered in England No. 2764339

See our current vacancies at www.brendata.co.uk


More information about the asterisk-users mailing list