[asterisk-users] Bridged PRI calls - processor involvement?

Steve Hanselman SteveH at brendata.co.uk
Mon Jun 11 03:20:11 CDT 2007


This is the io wait figure from vmstat.

If I run a vmstat 2 whilst I'm on a call I can see that the "wa" figure
gets very high when the missing audio problem occurs.

Steve


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Matthew
Fredrickson
Sent: 08 June 2007 19:38
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Bridged PRI calls - processor involvement?

iowait time?  I'm not familiar with that.  Where are you seeing that?  
Also, is it a reproducible problem?

---
Matthew Fredrickson
Software Engineer
Digium, Inc.

On Jun 8, 2007, at 11:23 AM, Steve Hanselman wrote:

> It probably did but we run in updates every week and nobody can state
> exactly when the problem started only "a few weeks ago" - not very
> helpful.
>
> I can see that when I hear the issue the iowait time is high on the
> processor.
>
> Steve
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Matthew
> Fredrickson
> Sent: 08 June 2007 15:43
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Bridged PRI calls - processor 
> involvement?
>
> Did it accompany an update you made?  If you can find out what version
> the problem started occurring, that would help in fixing the problem.
>
> Matthew Fredrickson
> Software/Hardware Engineer
> Digium, Inc.
>
> On Jun 8, 2007, at 2:59 AM, Steve Hanselman wrote:
>
>> The setup.
>>
>> Asterisk is on a 3G Zeon Dell 2850 running Fedora Core 5/6 (all yum
>> updates applied), the TE410 lives on it's own interrupt.
>> Asterisk sits between our telco and a PRI enabled PBX.
>> These are the relevant versions installed:
>>
>> Linux: 2.6.20-1.2316.fc5smp
>> Zaptel: 1:1.4.2.1-34.fc5
>> Asterisk: 1:1.4.0-34.fc5.at
>> Libpri: 1:1.4.0-16.fc5.at
>> Wildcard details:
>> Found TE4XXP at base address fe3ffc00, remapped to f88bec00
>> TE4XXP version c01a016a, burst OFF, slip debug: OFF
>> Octasic optimized!
>> FALC version: 00000005, Board ID: 00
>> Reg 0: 0x377bb400
>> Reg 1: 0x377bb000
>> Reg 2: 0xffffffff
>> Reg 3: 0x00000000
>> Reg 4: 0x00000001
>> Reg 5: 0x00000000
>> Reg 6: 0xc01a016a
>> Reg 7: 0x00001f00
>> Reg 8: 0x00000000
>> Reg 9: 0x00ff0000
>> Reg 10: 0x0000004a
>> TTE4XXP: Launching card: 0
>> TE4XXP: Setting up global serial parameters
>> Found a Wildcard: Wildcard TE410P (3rd Gen)
>> TE4XXP: Span 1 configured for CCS/HDB3/CRC4
>> TE4XXP: Span 2 configured for CCS/HDB3/CRC4
>>
>>
>>
>> The problem:
>>
>> At random points during calls we lose 1-3 seconds of speech (both
ways
>> both callee and caller), this can be replicated (or at least a very
>> good
>> approximation!) by generating a high level of interrupt/cpu activity
>> (for instance copying data from a USB caddy as we tried the other day
>> in
>> an attempt to reproduce this more reliably).
>>
>> The calls are bridged PRI:PRI calls, no VOIP involvement.
>>
>> This was not a problem until approx 3-4 weeks ago, but I can't tie it
>> down to an exact date.
>>
>> Steve
>>
>>
>>> Interrupt sharing is not a problem anymore with those cards.  What
>>> version of zaptel did you try installing?  Can you explain more
about
>>> your problems?  Also, your configuration and setup would help out as
>>> well.
>>>
>>> ---
>>> Matthew Fredrickson
>>> Digium, Inc.
>>
>>
>> The information contained in this email is intended for the personal
>> and confidential use
>> of the addressee only. It may also be privileged information. If you
>> are not the intended
>> recipient then you are hereby notified that you have received this
>> document in error and
>> that any review, distribution or copying of this document is strictly
>> prohibited. If you have
>> received  this communication in error, please notify Brendata
>> immediately on:
>>
>> +44 (0)1268 466100, or email 'technical at brendata.co.uk'
>>
>> Brendata (UK) Ltd
>> Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
>> Registered Office as above. Registered in England No. 2764339
>>
>> See our current vacancies at www.brendata.co.uk
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> The information contained in this email is intended for the personal 
> and confidential use
> of the addressee only. It may also be privileged information. If you 
> are not the intended
> recipient then you are hereby notified that you have received this 
> document in error and
> that any review, distribution or copying of this document is strictly 
> prohibited. If you have
> received  this communication in error, please notify Brendata 
> immediately on:
>
> +44 (0)1268 466100, or email 'technical at brendata.co.uk'
>
> Brendata (UK) Ltd
> Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
> Registered Office as above. Registered in England No. 2764339
>
> See our current vacancies at www.brendata.co.uk
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


The information contained in this email is intended for the personal and confidential use
of the addressee only. It may also be privileged information. If you are not the intended
recipient then you are hereby notified that you have received this document in error and
that any review, distribution or copying of this document is strictly prohibited. If you have 
received  this communication in error, please notify Brendata immediately on: 

+44 (0)1268 466100, or email 'technical at brendata.co.uk' 

Brendata (UK) Ltd
Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
Registered Office as above. Registered in England No. 2764339

See our current vacancies at www.brendata.co.uk


More information about the asterisk-users mailing list