[asterisk-users] 1.4 Zaptel/Sangoma Issues on CentOS

[Steve Totaro]

Any ideas?  Sangoma support is closed for the evening.

I have the latest Sangoma drivers and Asterisk 1.4 everything installed.

When I fire up asterisk, I keep getting "Primary D-Channel on span 1 up"
repeated over and over.  The B channels never come up.  There are no
errors in any of the logs, zttool, or the wanpipe tools.

Intense pri debug output:
< Unnumbered frame:
< SAPI: 00  C/R: 1 EA: 0
<  TEI: 000        EA: 1
<   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended
) ]
< 0 bytes of data
-- Got SABME from network peer.
Sending Unnumbered Acknowledgement

> [ 02 01 73 ]

> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 0 11: 3  [ UA (unnumbered acknowledgement) ]
> 0 bytes of data
-- Restarting T203 counter
q921.c:709 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED
q921.c:664 q921_dchannel_up: q921_state now is
Q921_LINK_CONNECTION_ESTABLISHED
-- Restarting T203 counter
  == Primary D-Channel on span 1 up
pri intense debug span 1
< [ 02 01 7f ]

< Unnumbered frame:
< SAPI: 00  C/R: 1 EA: 0
<  TEI: 000        EA: 1
<   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended
) ]
< 0 bytes of data
-- Got SABME from network peer.
Sending Unnumbered Acknowledgement

> [ 02 01 73 ]

> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 0 11: 3  [ UA (unnumbered acknowledgement) ]
> 0 bytes of data
-- Restarting T203 counter
q921.c:709 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED
q921.c:664 q921_dchannel_up: q921_state now is
Q921_LINK_CONNECTION_ESTABLISHED
-- Restarting T203 counter
  == Primary D-Channel on span 1 up
< [ 02 01 7f ]

< Unnumbered frame:
< SAPI: 00  C/R: 1 EA: 0
<  TEI: 000        EA: 1
<   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended
) ]
< 0 bytes of data
-- Got SABME from network peer.
Sending Unnumbered Acknowledgement

> [ 02 01 73 ]

> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 0 11: 3  [ UA (unnumbered acknowledgement) ]
> 0 bytes of data
-- Restarting T203 counter
q921.c:709 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED
q921.c:664 q921_dchannel_up: q921_state now is
Q921_LINK_CONNECTION_ESTABLISHED
-- Restarting T203 counter
  == Primary D-Channel on span 1 up

Thanks,
Steve Totaro
http://www.asteriskhelpdesk.com
KB3OPB