[asterisk-users] FX Dialing Odd

[Eric "ManxPower" Wieling]

You want Asterisk to dial 1-630-XXX-XXX, but the telco only got 
630-XXX-XXXX, which the provider will see "630-XXXX" and assume your 
current area code of 312.



Rob Schall wrote:
> But if this was the case, then why would the message playback (from the
> provider) read back the digits from the start. I mean, I dialed
> 630-XXX-XXX and it reads back 312 (my local area code)-630-XXX-X
> 
> I would think if it wasn't waiting, then it would do like a 312-30X-XX-XX
> 
> Rob
> 
> 
> John Novack wrote:
>>
>> Rob Schall wrote:
>>> Here's a possible bug, or more likely, I'm just missing something.
>>>
>>> We have a pots card in one of our asterisk boxes. Its a simple
>>> asterisk setup with one FXO/FXS card and basic static extensions
>>> file, etc. When we dial out over the pots line, 4 out of 5 times, it
>>> will work. However,every 4 or 5 times, we get an error back from the
>>> provider that says "The number you have dialed..... blah blah blah". 
>> Common defect in the Zaptel driver.
>> It does NOT listen for dial tone, so if you have not inserted a "w" or
>> three into the dial string, it will dial before the Central Office is
>> ready, and it may miss a digit, causing misdials.
>>
>> Curious that cheap modems years ago learned to listen for dial tone,
>> but  the Zaptel driver doesn't, and of course this is considered a
>> "feature request" rather than a bug, and no one seems to want to fix it.
>>
>> John Novack
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>