No subject
Thu Jul 12 09:23:04 CDT 2007
handled.
So....what do I do?
Thanks,
MD
=1===================================================
!! Invalid Protocol Profile field 0x11
-- Accepting call from '2004000' to '111' on channel 0/23, span 1
-- Executing NoOp("Zap/23-1", "Incoming call from Meridian1") in new
stack
-- Executing NoOp("Zap/23-1", " From number: 2004000| revised to 2004")
in new stack
-- Executing Set("Zap/23-1", "CALLERID(num)=2004") in new stack
-- Executing NoOp("Zap/23-1", " From name: TELEPHONE ROOM") in new
stack
-- Executing Macro("Zap/23-1", "dialfromMeridian|111") in new stack
-- Executing NoOp("Zap/23-1", "Incoming call to number 111| which maps
to device: ") in new stack
-- Executing GotoIf("Zap/23-1", "1?NoMatch") in new stack
-- Goto (macro-dialfromMeridian,s,5)
-- Executing NoOp("Zap/23-1", "Invalid extension in macro
dialfromMeridian") in new stack
-- Executing Hangup("Zap/23-1", "") in new stack
== Spawn extension (macro-dialfromMeridian, s, 6) exited non-zero on
'Zap/23-1' in macro 'dialfromMeridian'
== Spawn extension (macro-dialfromMeridian, s, 6) exited non-zero on
'Zap/23-1'
-- Hungup 'Zap/23-1'
!! Invalid Protocol Profile field 0x11
-- Accepting call from '2004000' to '123' on channel 0/23, span 1
-- Executing Answer("Zap/23-1", "") in new stack
-- Executing Playback("Zap/23-1", "tt-monkeys") in new stack
-- Playing 'tt-monkeys' (language 'en')
-- Channel 0/23, span 1 got hangup, cause 100
== Spawn extension (entryocgexternal, 123, 2) exited non-zero on
'Zap/23-1'
-- Hungup 'Zap/23-1'
=2===================================================
*CLI> pri debug span 1
Enabled debugging on span 1
< Protocol Discriminator: Q.931 (8) len=61
< Call Ref: len= 1 (reference 23/0x17) (Originator)
< Message type: SETUP (5)
< [04 03 80 90 a2]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)
< Ext: 1 User information layer 1: u-Law (34)
< [18 04 e9 80 83 17]
< Channel ID (len= 6) [ Ext: 1 IntID: Explicit, PRI Spare: 0, Exclusive
Dchan: 0
< ChanSel: Reserved
< Ext: 1 DS1 Identifier: 0
< Ext: 1 Coding: 0 Number Specified Channel Type:
3
< Ext: 0 Channel: 23 ]
< [1c 0a 11 be a1 06 02 01 01 02 01 01]
< Facility (len=12, codeset=0) [ 0x11, 0xbe, 0xa1, 0x06, 0x02, 0x01, 0x01,
0x02, 0x01, 0x01 ]
< [28 0f b1 54 45 4c 45 50 48 4f 4e 45 20 52 4f 4f 4d]
< Display (len=15) Charset: 31 [ TELEPHONE ROOM ]
< [6c 09 09 80 32 30 30 34 30 30 30]
< Calling Number (len=11) [ Ext: 0 TON: Unknown Number Type (0) NPI:
Private Numbering Plan (9)
< Presentation: Presentation permitted, user
number not screened (0) '2004000' ]
< [70 04 89 31 32 33]
< Called Number (len= 6) [ Ext: 1 TON: Unknown Number Type (0) NPI:
Private Numbering Plan (9) '123' ]
-- Making new call for cr 23
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 28 (cs0, Facility)
!! Invalid Protocol Profile field 0x11
-- Processing IE 40 (cs0, Display)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
> Protocol Discriminator: Q.931 (8) len=10
> Call Ref: len= 2 (reference 23/0x17) (Terminator)
> Message type: CALL PROCEEDING (2)
> [18 03 a9 83 97]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type:
3
> Ext: 1 Channel: 23 ]
-- Accepting call from '2004000' to '123' on channel 0/23, span 1
-- Executing Answer("Zap/23-1", "") in new stack
> Protocol Discriminator: Q.931 (8) len=10
> Call Ref: len= 2 (reference 23/0x17) (Terminator)
> Message type: CONNECT (7)
> [18 03 a9 83 97]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type:
3
> Ext: 1 Channel: 23 ]
-- Executing Playback("Zap/23-1", "tt-monkeys") in new stack
-- Playing 'tt-monkeys' (language 'en')
< Protocol Discriminator: Q.931 (8) len=8
< Call Ref: len= 1 (reference 23/0x17) (Originator)
< Message type: RELEASE (77)
< [08 02 81 e4]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Private network serving the local user (1)
< Ext: 1 Cause: Invalid information element contents
(100), class = Protocol Error (6) ]
-- Processing IE 8 (cs0, Cause)
-- Channel 0/23, span 1 got hangup, cause 100
== Spawn extension (entryocgexternal, 123, 2) exited non-zero on
'Zap/23-1'
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release
Request
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 23/0x17) (Terminator)
> Message type: RELEASE COMPLETE (90)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Private network serving the local user (1)
> Ext: 1 Cause: Normal Clearing (16), class = Normal Event
(1) ]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
-- Hungup 'Zap/23-1'
< Protocol Discriminator: Q.931 (8) len=8
< Call Ref: len= 1 (reference 23/0x17) (Originator)
< Message type: RELEASE (77)
< [08 02 81 e4]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Private network serving the local user (1)
< Ext: 1 Cause: Invalid information element contents
(100), class = Protocol Error (6) ]
-- Making new call for cr 23
-- Processing IE 8 (cs0, Cause)
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 23/0x17) (Terminator)
> Message type: RELEASE COMPLETE (90)
> [08 02 81 d1]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Private network serving the local user (1)
> Ext: 1 Cause: Invalid call reference value (81), class =
Invalid message (5) ]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
=3========================================================
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (3)
> [ 02 01 01 07 ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 003 P/F: 1
> 0 bytes of data
-- Restarting T203 counter
< [ 02 01 01 0b ]
< Supervisory frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 005 P/F: 1
< 0 bytes of data
-- ACKing all packets from 4 to (but not including) 5
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
< [ 00 01 06 0a 08 01 17 05 04 03 80 90 a2 18 04 e9 80 83 17 1c 0a 11 be a1
06 02 01 01 02 01 01 6c 09 09 80 32 30 30 35 30 30 30 70 04 89 31 32 33 ]
< Informational frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< N(S): 003 0: 0
< N(R): 005 P: 0
< 44 bytes of data
-- ACKing all packets from 4 to (but not including) 5
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=44
< Call Ref: len= 1 (reference 23/0x17) (Originator)
< Message type: SETUP (5)
< [04 03 80 90 a2]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)
< Ext: 1 User information layer 1: u-Law (34)
< [18 04 e9 80 83 17]
< Channel ID (len= 6) [ Ext: 1 IntID: Explicit PRI Spare: 0 Exclusive
Dchan: 0
< ChanSel: Reserved
< Ext: 1 DS1 Identifier: 0
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 0 Channel: 23 ]
< [1c 0a 11 be a1 06 02 01 01 02 01 01]
< Facility (len=12, codeset=0) [ 0x11, 0xBE, 0xA1, 0x06, 0x02, 0x01, 0x01,
0x02, 0x01, 0x01 ]
PROTOCOL 11
A1 0006 (CONTEXT SPECIFIC [1])
02 0001 01 (INTEGER: 1)
02 0001 01 (INTEGER: 1)
< [6c 09 09 80 32 30 30 35 30 30 30]
< Calling Number (len=11) [ Ext: 0 TON: Unknown Number Type (0) NPI:
Private Numbering Plan (9)
< Presentation: Presentation permitted, user
number not screened (0) '2005000' ]
< [70 04 89 31 32 33]
< Called Number (len= 6) [ Ext: 1 TON: Unknown Number Type (0) NPI:
Private Numbering Plan (9) '123' ]
-- Making new call for cr 23
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 28 (cs0, Facility)
Handle Q.932 ROSE Invoke component
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
q931.c:3296 q931_receive: call 23 on channel 23 enters state 6 (Call
Present)
Sending Receiver Ready (4)
> [ 00 01 01 08 ]
> Supervisory frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 004 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
q931.c:2570 q931_call_proceeding: call 23 on channel 23 enters state 9
(Incoming Call Proceeding)
> [ 02 01 0a 08 08 02 80 17 02 18 03 a9 83 97 ]
> Informational frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> N(S): 005 0: 0
> N(R): 004 P: 0
> 10 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8) len=10
> Call Ref: len= 2 (reference 23/0x17) (Terminator)
> Message type: CALL PROCEEDING (2)
> [18 03 a9 83 97]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive
Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 23 ]
-- Accepting call from '2005000' to '123' on channel 0/23, span 1
-- Executing [123 at entryocgexternal:1] Answer("Zap/23-1", "") in new
stack
q931.c:2697 q931_connect: call 23 on channel 23 enters state 10 (Active)
> [ 02 01 0c 08 08 02 80 17 07 18 03 a9 83 97 ]
> Informational frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> N(S): 006 0: 0
> N(R): 004 P: 0
> 10 bytes of data
T_200 timer already going (2)
> Protocol Discriminator: Q.931 (8) len=10
> Call Ref: len= 2 (reference 23/0x17) (Terminator)
> Message type: CONNECT (7)
> [18 03 a9 83 97]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive
Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 23 ]
-- Executing [123 at entryocgexternal:2] Playback("Zap/23-1", "tt-monkeys")
in new stack
-- <Zap/23-1> Playing 'tt-monkeys' (language 'en')
< [ 00 01 08 0e 08 01 17 4d 08 02 81 e4 ]
< Informational frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< N(S): 004 0: 0
< N(R): 007 P: 0
< 8 bytes of data
-- ACKing all packets from 4 to (but not including) 7
-- ACKing packet 5, new txqueue is 6 (-1 means empty)
-- ACKing packet 6, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=8
< Call Ref: len= 1 (reference 23/0x17) (Originator)
< Message type: RELEASE (77)
< [08 02 81 e4]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: Private network serving the local user (1)
< Ext: 1 Cause: Invalid information element contents
(100), class = Protocol Error (e.g. unknown message) (6) ]
-- Processing IE 8 (cs0, Cause)
q931.c:3536 q931_receive: call 23 on channel 23 enters state 0 (Null)
Sending Receiver Ready (5)
> [ 00 01 01 0a ]
> Supervisory frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 005 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
-- Channel 0/23, span 1 got hangup, cause 100
== Spawn extension (entryocgexternal, 123, 2) exited non-zero on
'Zap/23-1'
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release
Request
> [ 02 01 0e 0a 08 02 80 17 5a 08 02 81 90 ]
> Informational frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> N(S): 007 0: 0
> N(R): 005 P: 0
> 9 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 23/0x17) (Terminator)
> Message type: RELEASE COMPLETE (90)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: Private network serving the local user (1)
> Ext: 1 Cause: Normal Clearing (16), class = Normal Event
(1) ]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
-- Hungup 'Zap/23-1'
< [ 00 01 0a 0e 08 01 17 4d 08 02 81 e4 ]
< Informational frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< N(S): 005 0: 0
< N(R): 007 P: 0
< 8 bytes of data
-- ACKing all packets from 6 to (but not including) 7
-- Something left to transmit (7), restarting T200 counter
< Protocol Discriminator: Q.931 (8) len=8
< Call Ref: len= 1 (reference 23/0x17) (Originator)
< Message type: RELEASE (77)
< [08 02 81 e4]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: Private network serving the local user (1)
< Ext: 1 Cause: Invalid information element contents
(100), class = Protocol Error (e.g. unknown message) (6) ]
-- Making new call for cr 23
-- Processing IE 8 (cs0, Cause)
> [ 02 01 10 0c 08 02 80 17 5a 08 02 81 d1 ]
> Informational frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> N(S): 008 0: 0
> N(R): 006 P: 0
> 9 bytes of data
T_200 timer already going (2)
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 23/0x17) (Terminator)
> Message type: RELEASE COMPLETE (90)
> [08 02 81 d1]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: Private network serving the local user (1)
> Ext: 1 Cause: Invalid call reference value (81), class =
Invalid message (e.g. parameter out of range) (5) ]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
< [ 02 01 01 12 ]
< Supervisory frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 009 P/F: 0
< 0 bytes of data
-- ACKing all packets from 6 to (but not including) 9
-- ACKing packet 7, new txqueue is 8 (-1 means empty)
-- ACKing packet 8, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (6)
> [ 02 01 01 0d ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 006 P/F: 1
> 0 bytes of data
-- Restarting T203 counter
< [ 02 01 01 13 ]
< Supervisory frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 009 P/F: 1
< 0 bytes of data
-- ACKing all packets from 8 to (but not including) 9
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
More information about the asterisk-users
mailing list