[asterisk-users] UK ISDN2 / BRI setting

[asterisk]

0.3.0-pre-1s

After working with traditional pabx's in the past I have known the setting
of layer 1 to call has fixed this problem.

Thanks

Neil

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tzafrir Cohen
Sent: 30 July 2007 11:34
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] UK ISDN2 / BRI setting

On Mon, Jul 30, 2007 at 10:09:32AM +0100, asterisk wrote:
> I am running asterisk 1.2 with bristuff 0.3.0 and have the following
> problem:

Which version of bristuff do you have exactly?

asterisk -rx 'zap show version'

> 
> When I make a call out it fails with a "chanunavail" message but if I make
a
> call in and then make a call out it is successful. I think this is because
> BT set the Layer 1 to turn off after a period of time.
> 
> I need to know how to set the Layer1 / 2 status to call rather than
> permanent which I think will fix the problem.

Should work, IIRC: the driver should ask the chip to "wake up" the link
when you want to call. No special higher-level operation should be
required on your side.

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users