[asterisk-users] how to configure zaptel for incoming call

[Travis Schafer]

Sanchal,
 
You may want to make sure that you have "immediate=no" set for your E1 channels in zapata.conf. This makes asterisk wait for digits, rather than skipping to the "s" extension on incoming calls.
 
--TS

>>> <sanchal.singh at alliance-infotech.com> 7/30/2007 4:14 AM >>>
Hi,
  I am able to dial through asterisk PBX having TE120P card to E1 card
running application. Communication was established successfully
  Now, I want to do the reverse way out. I am using the following
configurations

1)zaptel.conf
span=1,1,0,ccs,hdb3,crc4
defaultzone=us
bchan=1-15,17-31
dchan=16
2)zapata.conf
group=1
signalling=pri_net
switchtype=euroisdn
context=incoming
channel=1-15,17-31


    What configuration changes is to be done for landing of call to
asterisk PBX when dialled from E1 card running application. 
     I was trying to dial out from E1 card running application with
extension number 114 and added the following lines in extensions.conf of
asterisk configuration files
    exten=>114,1,Answer
but asterisk debugging console is giving the error message
-- Extension 's' in context 'channelbank' from '' does not exist. 
Rejecting call on channel 0/1, span 1

Can anybody tell me how to handle the configuration files for extension
number to be called from E1 card running application.

Thanx and regards,
sanchal




_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com-- 

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070730/55382108/attachment.htm