[asterisk-users] Unicall/Dont know how to handle Accepted

Carlos Chavez cursor at telecomabmex.com
Fri Jul 27 11:18:59 CDT 2007


On Fri, 2007-07-27 at 11:09 -0500, Victor Toofic wrote:
> Hi,
> 

> zaptel.conf:
> ------------
> span=1,0,0,cas,hdb3
> cas=1-15:1101
> cas=17-31:1101
> loadzone=mx
> defaultzone=mx
> ------------
> 
> unicall.conf
> ------------
> [channels]
> context=incoming
> usecallerid=yes
> hidecallerid=no
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> loglevel=255
> protocolclass=mfcr2
> protocolvariant=mx,10,10
> protocolend=cpe
> group=2
> channel => 1-15
> channel => 17-31
> ------------
> 
	Try changing protocol variant to: protocolvariant=mx,10,4

	Usually only you only need the last 4 digits of the DID to identify it.
Also, you only get 8 digits for the DNIS because that is the maximum
anyone will dial to get to you (7 if you are in a smaller city).  ANI is
always 10 in Mexico.


-- 
Telecomunicaciones Abiertas de México S.A. de C.V.
Carlos Chávez Prats
Director de Tecnología
+52-55-91169161 ext 2001
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20070727/11e06863/attachment.pgp 


More information about the asterisk-users mailing list