[asterisk-users] asterisk 1.4 and gnugk with ooh323

[Dovid B]

What output do you get from the CLI ?

----- Original Message ----- 
From: "yonoko molomo" <yonokomolomo at gmail.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Tuesday, July 17, 2007 9:59 AM
Subject: Re: [asterisk-users] asterisk 1.4 and gnugk with ooh323


> Hi,
> Thanks for the answer.
> Yes, I think both channels are built.
> I see following messages at startup:
> Parsing '/etc/asterisk/h323.conf': Found
> Creating H.323 Endpoint
> Parsing '/etc/asterisk/users.conf': Found
> Registered channel type 'H323' (The NuFone Network's Open H.323 Channel 
> Driver)
> H.323 listener started chan_h323.so =>
> The NuFone Network's OpenH323 Channel Driver
>
> [and few lines after]
> Parsing '/etc/asterisk/ooh323.conf': Found
> Registered channel type 'OOH323' (Objective Systems H323 Channel Driver)
> chan_ooh323.so => (^[[33;40mObjective Systems H323 Channel^[[0;37;40m)
>
> I am trying to use only ooh323 (removing the h323.conf file) but still
> does not work.
> I believe it is a configuration problem.
> Can someone point me to the correct configuration or example? The ones
> I have found so far did not help me much.
>
> Thanks
>
> 2007/7/16, Dovid B <asteriskusers at dovid.net>:
>> There are different h323 channel drivers. You seem to have built both. If
>> you try to dial using Dial(h323/.....) then you need h323.conf. If you 
>> try
>> dialing using Dial(ooh323/.....) then you need ooh323.conf. For me
>> personally the ooh323 (can't remember the name of it  - sleep 
>> deprivation)
>> works better for me.
>>
>> ----- Original Message -----
>> From: "yonoko molomo" <yonokomolomo at gmail.com>
>> To: <asterisk-users at lists.digium.com>
>> Sent: Monday, July 16, 2007 6:13 PM
>> Subject: [asterisk-users] asterisk 1.4 and gnugk with ooh323
>>
>>
>> > Hello all,
>> > I have seen some people asking how to configure asterisk to work with
>> > h323 but i did not manage to do fix it yet (i am not an asterisk
>> > expert).
>> > Can someone help me configuring asterisk?
>> > It is already compiled asterisk 1.4.5 with H323 support.
>> > Everything looks fine.
>> > Then i understand i need to configure several files:
>> > -sip.conf
>> > -ooh323.conf
>> > -extensions.conf
>> >
>> > do i also need to configure the h323.conf?
>> >
>> > i want asterisk and gnugk in the same machine (lets say ip 
>> > 192.168.0.10).
>> > then sip_client at 192.168.0.100 (telephone number assigned for
>> > instance 100) and H323_client at 192.168.0.200 (telephone number
>> > assigned 200)
>> >
>> > how do i configure the files to do this?
>> >
>> > if i type show channeltypes i see:
>> >
>> > Type        Description                              Devicestate
>> > Indications  Transfer
>> > ----------  -----------                              -----------
>> > -----------  --------
>> > OOH323      Objective Systems H323 Channel Driver    no           yes
>> >        no
>> > SIP         Session Initiation Protocol (SIP)        yes          yes
>> >        yes
>> > H323        The NuFone Network's Open H.323 Channel  no           yes
>> >        no
>> >
>> > What does devicestate and trasfer mean? it is set to "no". is this ok?
>> >
>> >
>> > if someone could show me how to  configure the files to do this i
>> > would be very grateful.
>> >
>> > thanks!
>> >
>> > _______________________________________________
>> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
>> >
>> > asterisk-users mailing list
>> > To UNSUBSCRIBE or update options visit:
>> >   http://lists.digium.com/mailman/listinfo/asterisk-users
>> >
>>
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>