[asterisk-users] Installed TDM02B - Problem when other end hangs up

[Lee Jenkins]

Eric "ManxPower" Wieling wrote:
> Lee Jenkins wrote:
>> Stephen Bosch wrote:
>>> Lee Jenkins wrote:
>>>> I forgot to mention that the one thing that seems to be consistent is
>>>> that I can get the zap line to reset and dialout again correctly by
>>>> calling into the system on that zap line, dialing and extension and
>>>> allowing the extension to hangup on the caller first.
>>>>
>>>> Then it will dial out again.  Odd.
>>>
>>> Well, not really -- when the extension hangs up, Asterisk knows the
>>> channel has been abandoned and clears it.
>>>
>>> When the remote party hangs up first, the card doesn't tell Asterisk
>>> that the channel is clear (because it doesn't know the caller has hung
>>> up), so Asterisk has no idea and presumes it is unavailable.
>>>
>>
>> Interesting.  But if that was the case, wouldn't restarting asterisk 
>> (#CLI restart now) clear the problem?  Because on my system, it does 
>> not clear the problem, only a complete restart of the server seems to 
>> work.  Well that and trying again some considerable time later which 
>> may or may not work then.
> 
> Asterisk does not terminate active calls when doing a "reload".  I 
> assume Asterisk thinks there is an active call on that port.
> _______________________________________________

Hi Eric,

I did a restart, not a reload.  Actually I've tried restarting the 
server and where I originally thought it did reset, only randomly will 
restarting the whole server actually work.

-- 

Warm Regards,

Lee