[asterisk-users] Sample Config.

[Jonson Player]

Hello Mihaela,
my name is Catalin. Thank you for you advices, I still hev problems with my
spa3102, I just wanna use a xlite to log in to sipura... is that possible? I
try to make small steps to understand all options.
Thank you for your support.

Catalin S.


On 1/27/07, Token PBX <tokenhr at gmail.com> wrote:
>
> Hi!
>
>
>
> I don't understand  what you mean by : „configure voice part on it", but I
> can give general guidelines:
>
>
>
> First you setup SPA3000 web UI:
>
> 1) Line1 Tab:
>
>
>
> Sip settings:
>
>    SIP port : 5060
>
>
>
> Proxy and Registration:
>
>    Proxy: Asterisk IP
>
>
>
> Subscriber Information:
>
>    Display Name: FXS_username
>
>    Password: FXS password
>
>    User ID: FXS_username
>
>
>
> 2) PSTN Line Tab:
>
>
>
> SIP Settings:
>
>    SIP port: 5061
>
>
>
> Proxy and Registration:
>
>    Proxy: Asterisk IP
>
>
>
> Subscriber Information:
>
>    Display Name: FXO_username
>
>    Password: FXO_password
>
>    User ID: FXO_username
>
>
>
> Dial Plans:
>
>    Dial Plan 1: (<S0:s at Asterisk IP:5060>)    (may be any other dial plan)
>
>
>
> VoIP-To-PSTN Gateway Setup:
>
>    VoIP-To-PSTN Gateway Enable: Yes
>
>    Line 1 VoIP Caller DP: 1     (or any other setup like Dial Plan 1)
>
>
>
> VoIP Users and Passwords (HTTP Authentication)
>
>    VoIP User 1 Auth ID: asterisk
>
>    VoIP User 1 DP: 1    (same as above)
>
>
>
> PSTN-To-VoIP Gateway Setup:
>
>    PSTN-To-VoIP Gateway Enable: Yes
>
>
>
>
>
> Then Asterisk sip.conf:
>
>
>
>  [ FXO_username]
>
> disallow=all
>
> allow=alaw
>
> type=friend
>
> fromuser= FXO_username
>
> username= FXO_username
>
> secret= FXO_password
>
> host=dynamic
>
> dtmfmode=rfc2833
>
> canreinvite=no
>
> qualify=1000
>
> context=incoming
>
> port=5061
>
>
>
> [FXS_username ]
>
> disallow=all
>
> allow=alaw
>
> type=friend
>
> username= FXS_username
>
> secret= FXS_password
>
> host=dynamic
>
> dtmfmode=rfc2833
>
> canreinvite=no
>
> qualify=1000
>
> context=outgoing
>
> Best regards
> Mihaela MJ
>
>
>  On 1/26/07, Jonson Player <jonsonplayer at gmail.com> wrote:
>
> >  Hello,
> > I just buyed a SPA3102 from Linksys. Can anyone help me or guide me to
> > configure voice part on it. I cannot get it if I can use like peer for my
> > asterisk. Please help me with some tips.
> > Thank you guys.
> >
> > Regards,
> > Jonson.
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com<http://easynews.com/>--
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> >
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com <http://easynews.com/>--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070127/44734fb2/attachment.htm