[asterisk-users] Sangoma card dying after 1hour

Jon Schøpzinsky jos at detele.dk
Fri Jan 26 03:06:18 MST 2007


I am running the newest version, from the sangoma wiki.

Jon

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Davies
Sent: 26. januar 2007 10:56
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Sangoma card dying after 1hour

On 1/26/07, Jon Schøpzinsky <jos at detele.dk> wrote:
>
> Hello List
>
> I am having a rather big problem with a sangoma A104 card, I just installed
> to replace a Digium TE410 card, that was acting up.
>
> But now we have a problem with the sangoma card. It runs great after being
> started, and calls proceed as normal, but after about 1 hour, it stops being
> able to make and receive calls.
>
> If I run wanpipemon debug,  can see that the card still receives packets
> from the ISDN, but when I make a call, I cant see it in wanpipemon, and
> asterisk just responds with a:
>
> NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' (cause 34 -
> Circuit/channel congestion)
>
> I am pretty shure that this is a configuration issue, but are there anything
> I need to be aware of when moving from a Digium card to a sangoma card?

Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded
as there are some resource leak fixes in that version.

Regards,
Steve
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


More information about the asterisk-users mailing list