[asterisk-users] Asterisk 1.4 & Polycom buddy status

[Olle E Johansson]

24 jan 2007 kl. 18.10 skrev Eric "ManxPower" Wieling:

> James Fromm wrote:
>
>> The behavior we see is that the SIP interface in the queue will  
>> sometimes not release from the in-use state.  Connecting to the  
>> interface from another SIP device and immediately hanging up will  
>> clear the state.
>> The phones in question are configured with one line that will  
>> except only one call.  The device itself does not think it is in- 
>> use because it will accept another call.  Something in the SIP  
>> channel driver is not clearing the state when a call is completed.
>> There is definitely no correlation between this and Asterisk  
>> restarting.  In fact, if a device is 'stuck' on in-use, restarting  
>> Asterisk will clear the state.
>> I've been working on this for a week now.  It only started for us  
>> because I just implemented the call-limit option in the sip.conf  
>> in Asterisk for the devices.  See my posts with subject 'Queue and  
>> Interface time out'.
>
> I believe there is/was a bug relating to call-limit.  Buddy Watch  
> doesn't work if you use call-limit and if a call from a queue is  
> transfered, the call-limit is not released until the original call  
> is terminated.  I do not know if these issues have been fixed or not.

Again, a relation to call transfer. I think the bug is that we don't  
handle call-limits properly during a call transfer. That needs
to be verified and fixed.

/O