[asterisk-users] No D-channels available! Using Primary channel 16 as D-channel anyway!

[Kong Zhen Shin]

i tried without yellow as well.. and according to zaptel drivers, the 
yellow don't do anything, just put a yellow signal where there is 
nothing from the provider.

and yes, i did put a pri_net on the span 2, the config is a typo.. 
thanks for reminding me..

but still i got those errors.... :(

Leo Ann Boon wrote:
> <snip>
>> zaptel.conf
>> -------------------------------------------
>> loadzone=uk
>> defaultzone=uk
>>
>>
>> span=1,1,1,ccs,hdb3,crc4,yellow
>> span=2,0,1,ccs,hdb3,crc4,yellow
> I don't think yellow alarm is necessary unless you've been advised by 
> your carrier.
>>
>> bchan=1-15,32-46
>> dchan=16,47
>> bchan=17-31,48-62
>> -------------------------------------------
>> where span 1 is to the provider and span 2 is to the PBX
>>
>> zapata.conf
>> ---------------------------------------------
>> context=from-pstn
>> switchtype=dms100
>> signalling=pri_cpe
>> callerid=asreceived
>> group=1
>> callgroup=1
>> pickupgroup=1
>> rxgain=0.0
>> txgain=0.0
>> channel=>1-15,17-31
>>
>> context=from-pstn
>> switchtype=dms100
>> signalling=pri_cpe
> If you are connecting the second span to the 11c, shouldn't this be 
> pri_net? And, since you're using E1 I believe both your switchtype 
> should be euroisdn instead of dms100.
>
> Leo
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>