[asterisk-users] TDM2400 Hardware Echo Cancel

[Mailing List]

Had the exact same issue with the hardware canceller. If I set echocancel=no then the problem goes away.
Very weird that the static only happens on our side and we only hear it.

 
----- Original Message ----- 
From: "Webster, Andrew" <awebster at connectalk.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Sent: Tuesday, January 23, 2007 2:42 PM
Subject: RE: [asterisk-users] TDM2400 Hardware Echo Cancel


I have been having the same problems since installing a TDM2400 with
hardware echo canceller.  The best way to describe the sound is a
background crackle or hiss that just can't be filtered out.
Increasing the RX gain just makes the problem worse.
SIP to SIP calls are flawless.

An acquaintance told me the analog line level is too low, but when
plugging a regular phone into the line, the signal is plenty loud
enough.
I am curious if anyone else had similar issues with the TDM2400 card and
if they have resolved it.

--
Andrew

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Adam Sharples
> Sent: Tuesday, January 16, 2007 09:00
> To: asterisk-users at lists.digium.com
> Subject: [asterisk-users] TDM2400 Hardware Echo Cancel
> 
> Good Day List,
> 
> I'm having some issues with echo cancel on my Asterisk box, and have
> done
> extensive reading and have gained some useful pointers from this list
> but have a couple of hopefully fairly simple questions.
> The Asterisk box is connected via 20 FXO ports on a TDM2400 with the
> Hardware echo cancel module.  Echo cancel almost works, but the users
> hear
> what they describe as a 'crackle' coming back when they talk.
> 
> I want to tune to echo canceller, but am unsure if any of the options
> provided have any effect on the hardware module.  Do the settings such
> as
> echocancel and echotraining in Zapata.conf affect the hardware module?
> 
> Would I be better removing the hardware module and tuning the software
> echo
> canceller?
> 
> The asterisk box is currently running 1.2.13, with zaptel 1.2.  Would
> you
> advise upgrading to the newer Zaptel drivers?  I don't want to upgrade
> Asterisk itself just yet.
> 
> Any help or pointers to documentation regarding the hardware echo
cancel
> module would be greatly appreciated,
> 
> 
> Thanks,
> 
> 
> 
> Adam Sharples
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users