[asterisk-users] Asterisk + Unicall + Telmex E1 MFC/R2 Argentina + Meridian

[Facundo Ameal]

Thanks for your help, but I've already adjusted timers on the source
code. I found your document a week ago and read it.
Do you really think that is a matter of timers only?

Greets!

On 1/18/07, Moises Silva <moises.silva at gmail.com> wrote:
> Sometimes timers need to be adjusted on the mfcr2 source code.
> Sometimes is missconfiguration. Anyway, may be this document can help
> you out to debug the problem:
>
> http://moy.ivsol.net/unicall/mfcr2-asterisk-unicall-0.2-english.pdf
>
> Kind Regards
>
> On 1/17/07, Facundo Ameal <fameal at gmail.com> wrote:
> > Hi everyone!
> > I'm having some issue trying to place calls with asterisk connected to
> > an E1 R2 from Telmex Argentina. The other E1 port is connected to a
> > Meridian which also uses R2 protocol. Calls sometimes fail with
> > different error messages such as: Unicall protocol error 32773, 32772,
> > 32769. Some other calls fail saying:
> >                            Far end disconnected(cause=Destination out
> > of order [27])
> >                            Far end disconnected(cause=User alerting,
> > no answer [19])
> >                            Far end disconnected(cause=Switching
> > equipment congestion [42])
> >                            Far end disconnected(cause=User busy [17])
> >
> > I don't think those causes are real, because if you use another line,
> > yo establish the call. Could it be something about timing of ABCD
> > bits?
> >
> > I'm using:
> > Asterisk 1.2.6
> > Zaptel 1.2.5
> > libmfcr2 0.0.3
> > libunicall 0.0.3
> > libsupertone 0.0.2
> > spandsp-0.0.3
> >
> > And this is my unicall.conf:
> >
> > [channels]
> > loglevel=1023
> > usecallerid=yes
> > hidecallerid=no
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=yes
> > cancallforward=yes
> > callerid=asreceived
> > callreturn=yes
> > echocancel=no
> > echocancelwhenbridged=no
> > echotraining=no
> > rxgain=0.0
> > txgain=0.0
> > callgroup=1
> > pickupgroup=1
> > immediate=no
> >
> > musiconhold=default
> > protocolclass=mfcr2
> > protocolvariant=ar,10,4,15
> > protocolend=cpe
> > group=1
> > context=from-zaptel
> > channel => 1-15
> > channel => 17-29
> >
> > loglevel=0
> > usecallerid=yes
> > hidecallerid=no
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=yes
> > cancallforward=yes
> > callerid=asreceived
> > callreturn=yes
> > echocancel=yes
> > echocancelwhenbridged=yes
> > echotraining=yes
> > rxgain=0.0
> > txgain=0.0
> > callgroup=1
> > pickupgroup=1
> > immediate=no
> >
> > protocolclass=mfcr2
> > protocolvariant=ar,0,12,12
> > protocolend=cpe
> > group=2
> > context=hacia-afuera
> > channel => 32-46
> > channel => 48-60
> >
> >
> > Thanks in advance!
> >
> > Greets!
> >
> >
> >
> > --
> > Facundo Ameal.
> > fameal<at>gmail<dot>com
> > Linux User #395088
> >
> > Share your knowledge, use free software.
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> --
> "Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
Facundo Ameal.
fameal<at>gmail<dot>com
Linux User #395088

Share your knowledge, use free software.