[asterisk-users] HowTo Config Asterisk and SS7

[Nitesh Divecha]

Gary Mensenares wrote:
> Though I haven't really tried it out myself, one option I've seen would  be
> to use the same set of A100-series cards (the same one also being used for
> T1/E1/J1) from Sangoma to handle the physical port and their commercial SS7
> gateway software for the out-of-band signalling. However, the SS7 Gateway is
> not really cheap and has to be setup by Sangoma personnel themselves. The
> SS7 Gateway will set you back around US$5K.
>
> Anyone else have an alternative.
>
>   
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com 
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
>> Nitesh Divecha
>> Sent: Tuesday, January 16, 2007 11:45 PM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: [asterisk-users] HowTo Config Asterisk and SS7
>>
>> Hello Asterisk,
>>
>> Can anyone help or put some light on, how can I configure 
>> Asterisk to work with SS7?
>>
>> What do I need, in terms of Hardware and Software?
>>
>> Regards,
>> Neel
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>     
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>   
Thanks Gary,

So can I use Digium T1/E1 card and interconnect using SS7?

Please has anyone done installation with SS7 using Digium T1/E1 card?

Regards,
Neel