[asterisk-users] Sangoma A102d and Asterisk on Debian 3.1.

[Erik Forsen]

On Jan 11, 2007, at 11:08 PM, Jarek Jarzebowski wrote:

> Dnia 31-12-2006 o 18:05:00 Jarek Jarzebowski <jarekjlst at o2.pl>  
> napisał(a):
>
>> Dnia 31-12-2006 o 17:39:10 Tzafrir Cohen  
>> <tzafrir.cohen at xorcom.com> napisał(a):
>>
>>> On Sun, Dec 31, 2006 at 05:08:26PM +0100, Jarek Jarzebowski wrote:
>>>> Dnia 31-12-2006 o 16:17:19 Tzafrir Cohen <tzafrir.cohen at xorcom.com>
>>>> napisał(a):
>>>>
>>>> >On Sun, Dec 31, 2006 at 03:59:14PM +0100, Jarek Jarzebowski wrote:
>>>> >>
>>>> >>Hi All,
>>>> >>
>>>> >>is anybody using Sangoma A102d card with Asterisk on Debian 3.1?
>>>> >>I configure and install Sangoma wanpipe step by step based on  
>>>> Sangoma
>>>> >>Wiki
>>>> >>and manuals but can not get success results. I suppose that it  
>>>> may be
>>>> >>some
>>>> >>Debian specific case.
>>>> >
>>>> >AFAIK, that procedure has been tested on Debian Sarge before.
>>>> >
>>>> >What specific problems you have?
>>>> >
>>>>
>>>> I use wanpipe-2.3.4-3. I run ./Setup install. After standard 2  
>>>> frist
>>>> question (answer 'y') I got:
>>>>
>>>> Please specify absolute path name of your linux directory
>>>>
>>>>         (Press Enter for Default: /lib/modules/2.4.27-3-686-smp/ 
>>>> build)
>>>>
>>>> I press Enter. And got:
>>>>
>>>> Upgrading WANPIPE kernel documentation ...Done.
>>>>
>>>>
>>>> Upgrading WANPIPE kernel headers ...Done.
>>>>
>>>> Upgrading WANPIPE kernel drivers ...Done.
>>>>
>>>> cp: cannot stat `drivers/net/wan/Makefile': No such file or  
>>>> directory
>>>> grep: drivers/net/wan/Makefile: No such file or directory
>>>> Updating T1/E1 in
>>>> /lib/modules/2.4.27-3-686-smp/build/drivers/net/wan/Makefile
>>>> ./Setup: line 895: drivers/net/wan/Makefile.nex: No such file or  
>>>> directory
>>>> cat: drivers/net/wan/Makefile: No such file or directory
>>>
>>> drivers/net/wan/Makefile does not exist in the kernel-headers  
>>> package of
>>> 2.4 (e.g: your 2.4.27-3-686-smp) . It does seem to exist in the
>>> kernel-headers packagers of 2.6 .
>>>
>>> So one thing to try: use kernel 2.6:
>>>
>>>   apt-get install kernel-image-2.6-686-smp kernel-headers-2.6-686- 
>>> smp
>>>
>>> and reboot to that kernel.
>>>
>>> Note, however that this is just one educated guess of me.
>>>
>>
>> OK. I will try that and give an answer.
>
>
> I install wanpipe on Debian (kernel 2.6.8). Wanrouter seems to work  
> OK. But I am affraid that I do something wrong with asterisk  
> config. On asterisk I can see:
>
> *CLI> pri show span 1
> Primary D-channel: 16
> Status: Provisioned, Down, Active
> Switchtype: EuroISDN
> Type: CPE
> Window Length: 0/7
> Sentrej: 0
> SolicitFbit: 0
> Retrans: 0
> Busy: 0
> Overlap Dial: 0
> T200 Timer: 1000
> T203 Timer: 10000
> T305 Timer: 30000
> T308 Timer: 4000
> T313 Timer: 4000
> N200 Counter: 3
>
>
> *CLI> pri show span 2
> Primary D-channel: 47
> Status: Provisioned, Down, Active
> Switchtype: EuroISDN
> Type: CPE
> Window Length: 0/7
> Sentrej: 0
> SolicitFbit: 0
> Retrans: 0
> Busy: 0
> Overlap Dial: 0
> T200 Timer: 1000
> T203 Timer: 10000
> T305 Timer: 30000
> T308 Timer: 4000
> T313 Timer: 4000
> N200 Counter: 3
>
> *CLI> pri show intense debug span 1
>
>> [ 00 01 7f ]
>
>> Unnumbered frame:
>> SAPI: 00  C/R: 0 EA: 0
>>  TEI: 000        EA: 1
>>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced  
>> mode extended) ]
>> 0 bytes of data
> Sending Set Asynchronous Balanced Mode Extended
>
>> [ 00 01 7f ]
>
>> Unnumbered frame:
>> SAPI: 00  C/R: 0 EA: 0
>>  TEI: 000        EA: 1
>>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced  
>> mode extended) ]
>> 0 bytes of data
>
> It looks to me like some config "misunderstunding" between A102d  
> and Aterisk.
> I am total newbe to sangoma cards, Digium like Tor2 cards have no  
> such a problem.
>
> Looking forward to any ideas...
>
> Regards,
> --
> Jarek

Hi Jarek!

Did you find any solution to this problem? I have the exact same  
problem with a Sangoma A102d card on debian 3.1, 2.6.19 and wanpipe  
2.3.4-4. I've followed several different guides, including the one on  
sangoma's wiki. When I try to make a call out, I get this error:

Jan 16 13:17:28] WARNING[18084]: app_dial.c:1081 dial_exec_full:  
Unable to create channel of type 'ZAP' (cause 34 - Circuit/channel  
congestion)

Also got the same SABME errors as you do.

Best regards,

Erik Haider Forsén
_______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users