[asterisk-users] Problem with zaptel drivers or card

Administrator administrator at customerfunding.com
Wed Jan 10 11:03:08 MST 2007 

It is a T1 and I am not sure what you mean by behaves like an E1. The
connection is a T1 with 23 b-channels and 1 d-channel. I think it just so
happens that the problem channel is 16 on the card. This worked fine for
over a year before the upgrade to the zaptel drivers.

 
James 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tzafrir Cohen
Sent: Wednesday, January 10, 2007 10:06 AM
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] Problem with zaptel drivers or card

On Wed, Jan 10, 2007 at 09:39:47AM -0700, Administrator wrote:
> Results From cat /proc/zaptel/*
> 
> Span 1: WCTDM/0 "Wildcard TDM2400P Board 1"
>         IRQ misses: 24
> 
>            1 WCTDM/0/0 FXOKS (In use)
>            2 WCTDM/0/1 FXOKS (In use)
>            3 WCTDM/0/2 FXOKS (In use)
>            4 WCTDM/0/3 FXOKS (In use)
>            5 WCTDM/0/4 FXOKS (In use)
>            6 WCTDM/0/5 FXOKS (In use)
>            7 WCTDM/0/6 FXOKS (In use)
>            8 WCTDM/0/7 FXOKS (In use)
>            9 WCTDM/0/8 FXOKS (In use)
>           10 WCTDM/0/9 FXOKS (In use)
>           11 WCTDM/0/10 FXOKS (In use)
>           12 WCTDM/0/11 FXOKS (In use)
>           13 WCTDM/0/12 FXOKS (In use)
>           14 WCTDM/0/13 FXOKS (In use)
>           15 WCTDM/0/14 FXOKS (In use)
>           16 WCTDM/0/15 FXOKS (In use)
>           17 WCTDM/0/16 FXOKS (In use)
>           18 WCTDM/0/17 FXOKS (In use)
>           19 WCTDM/0/18 FXOKS (In use)
>           20 WCTDM/0/19 FXOKS (In use)
>           21 WCTDM/0/20 FXOKS (In use)
>           22 WCTDM/0/21 FXOKS (In use)
>           23 WCTDM/0/22 FXOKS (In use)
>           24 WCTDM/0/23 FXOKS (In use)
> Span 2: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" B8ZS/ESF
> 
>           25 WCT1/0/1 Clear (In use)
>           26 WCT1/0/2 Clear (In use)
>           27 WCT1/0/3 Clear (In use)
>           28 WCT1/0/4 Clear (In use)
>           29 WCT1/0/5 Clear (In use)
>           30 WCT1/0/6 Clear (In use)
>           31 WCT1/0/7 Clear (In use)
>           32 WCT1/0/8 Clear (In use)
>           33 WCT1/0/9 Clear (In use)
>           34 WCT1/0/10 Clear (In use)
>           35 WCT1/0/11 Clear (In use)
>           36 WCT1/0/12 Clear (In use)
>           37 WCT1/0/13 Clear (In use)
>           38 WCT1/0/14 Clear (In use)
>           39 WCT1/0/15 Clear (In use)
>           40 WCT1/0/16
>           41 WCT1/0/17 Clear (In use)
>           42 WCT1/0/18 Clear (In use)
>           43 WCT1/0/19 Clear (In use)
>           44 WCT1/0/20 Clear (In use)
>           45 WCT1/0/21 Clear (In use)
>           46 WCT1/0/22 Clear (In use)
>           47 WCT1/0/23 Clear (In use)
>           48 WCT1/0/24 HDLCFCS (In use)

Is it supposed to be T1 or E1?

The card behaves as E1 but you attempt to configure it as T1.

> 
> zaptel.conf file:
> 
> fxoks=1-24
> span=2,1,0,esf,b8zs
> bchan=25-39
> #bchan=40
> bchan=41-47
> dchan=48
> loadzone=us
> defaultzone=us
> 
> James
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tzafrir
Cohen
> Sent: Tuesday, January 09, 2007 11:25 PM
> To: asterisk-users at lists.digium.com
> Subject: Re: [asterisk-users] Problem with zaptel drivers or card
> 
> On Tue, Jan 09, 2007 at 06:01:55PM -0700, Administrator wrote:
> > I have an Asterisk box running Fedora Core 4, Asterisk 1.4, Lippri, 1.4,
> and
> > Zaptel 1.4
> > 
> > The Digium cards installed are TDM2400 and TE110P.
> > 
> > Everything was working fine until I upgraded to zaptel 1.2.12 from 1.2.9
> > 
> > Now when I run ztcfg I get the following error message:
> > 
> > (CAS signalling on span 2 conflicts with Clear channel on channel 40)
> > 
> > --NOTE: signaling was spelled wrong in the error message--
> > 
> > I have since upgraded to 1.4 with the same problem.
> > 
> > Channel 40 is a standard bchan configuration and our provider sees no
> > problem with the channel.
> > 
> > When I disable the channel everything works fine.
> > 
> > My assumption is that something is wrong with the TE110P card.
> > 
> > Has anyone seen anything else like this?
> 
> What do you get from:
> 
> cat /proc/zaptel/*
> 
> What do you have on /etc/zaptel.conf  ?
> 
> -- 
>                Tzafrir Cohen       
> icq#16849755                    jabber:tzafrir at jabber.org
> +972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
> http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

More information about the asterisk-users mailing list