[asterisk-users] Caller Id problem

[Yuan LIU]

>From: Jerry Jones <jjones at danrj.com>
>
>always include a wait before a dial
>
>give the callerid time to get into * before dialing, it arrives  between 
>the first and second ring, if you have * dial after the first  ring it will 
>not be there yet to pass along

Is there a way to count number of "rings"?

Yuan Liu

>On Jan 9, 2007, at 12:16 PM, Anton Frolov wrote:
>>
>>Dear List,
>>
>>My problem is that the incoming Caller Id is not displayed on the  local 
>>analog
>>phones (connected to a TDM400 card).
>>
>>I receive the CID correctly from my telco, but when I place the  call to 
>>the
>>internal analog line, the CID is not propagated.
>>
>>An interesting point: when I try to place a new call to an already  
>>bridged line,
>>I see the second call with the CID on the analog phone. The second  call 
>>is
>>placed exactly with the same command/config as the first one.
>>In the debug log I see (for the second call):
>>   -- Launched AGI Script /usr/share/asterisk/agi-bin/incoming.pl
>>   -- AGI Script Executing Application: (Dial) Options: (Zap/2||otw)
>>   -- CPE supports Call Waiting Caller*ID.  Sending '/066332XXXXXX'
>>
>>In other words, the CID is transmitted during a Call Waiting, but  not 
>>during a
>>normal call. It looks like Asterisk does not send the CID (or send  it too 
>>soon /
>>too late) during the first ("normal") call.
>>
>>Any idea is welcome.
>>
>>Thanks!
>>
>>AF.
>>
>>--
>>*zapata.conf*
>>
>>usecallerid=yes
>>usecallingpres=yes
>>callerid=asreceived
>>hidecallerid=no
>>callwaiting=yes
>>callwaitingcallerid=yes
>>treewaycalling=yes
>>transfer=yes
>>useincomingcalleridonzaptransfer=yes
>>...
>>
>>context=home
>>signalling=fxo_ks
>>channel => 1
>>
>>context=office
>>signalling=fxo_ks
>>channel => 2
>>
>>context=freebox
>>signalling=fxs_ks
>>callerid=asreceived
>>channel => 3
>>
>>context=francetelecom
>>signalling=fxs_ks
>>callerid=asreceived
>>channel => 4
>>
>>
>>*extensions.conf*
>>exten => s,1,Dial(${HOME},,otw)