[asterisk-users] Asterisk + 7910 + Skinny Reset

[asterisk at top-consulting.net]

I have a bunch of 7910's that I managed to get registered with  
Asterisk 1.2.14:

managed5*CLI> skinny show devices
Name DeviceId IP TypeId R Model NL
-------------------- ---------------- --------------- ------ - ------ --
test7 SEP0004C1878F8E 192.168.0.226 6 Y 7910 1

The problem is that the phone resets when I attempt to make a call  
from it or place a call to it.

If I pick up I have no dial tone and after 3-4 seconds the phone  
resets. When that happens, on Asterisk I see:

Attempting to Clear display on Skinny 500 at test7
skinny_new: tmp->nativeformats=4 fmt=4
-- Starting simple switch on '500 at test7'

then the phone resets.

when I try to call it, it doesn't ring and Asterisk displays:

Found device: test7
-- skinny_request(500 at test7)
-- Skinny cw: 0, dnd: 0, so: 0, sno: 0
skinny_new: tmp->nativeformats=4 fmt=4
-- skinny_call(Skinny/500 at test7-2)
Trying to send: ''
Displaying message ''
Displaying Prompt Status 'Ring-In'
-- Called 500 at test7
-- Skinny/500 at test7-2 is ringing
skinny_hangup(Skinny/500 at test7-2) on 500 at test7


then the phone resets.

Registration messages are:

-- Starting Skinny session from 192.168.0.226
Device SEP0004C1878F8E is attempting to register
-- Device 'test7' successfuly registered
Requesting capabilities
Received CapabilitiesRes
RECEIVED UNKNOWN MESSAGE TYPE: 2b
Buttontemplate requested
Sending 7910 template to 500 at test7 (7910)
Recieved SoftKey Template Request
Received SoftKeySetReq
Received LineStateReq
Received Time/Date Request



what could be causing this ?