[asterisk-users] MFC/R2 problems

[yusuf]

Hi,

if that means I should post my config, here goes:

zaptel:
span=1,1,3,cas,hdb3,crc4
cas=1-15:1101
cas=17-31:1101

unicall.conf:
protocolvariant=id,10,10
protocolend=cpe
group=1
channel => 1-15
channel => 17-31

wanpipe1.conf
FE_MEDIA        = E1
FE_LCODE        = HDB3
FE_FRAME        = CRC4
FE_LINE         = 1
TE_CLOCK        = NORMAL
TE_REF_CLOCK    = 0
TE_HIGHIMPEDANCE        = NO
LBO             = 120OH
TE_SIG_MODE     = CAS
FE_TXTRISTATE   = NO
MTU             = 1500
UDPPORT         = 9000
TTL             = 255
IGNORE_FRONT_END = NO
TDMV_SPAN       = 1
TDMV_DCHAN      = 16

[w1g1]
ACTIVE_CH       = ALL
TDMV_ECHO_OFF   = NO
TDMV_HWEC       = NO



Josué Conti wrote:
> Hi Yusuf, how are you?
> It orders in the list its configurations, so that let us can help.
> 
> Best Regards
> 
> Josue
> 
> 2007/1/8, yusuf < yusuf at ecntelecoms.com <mailto:yusuf at ecntelecoms.com>>:
> 
>     Hi all,
> 
>     I have Asterisk 1.2.10, zaptel 1.2.7, spandsp-0.0.3pre22 compiled,
>     and a Sangoma A101, and when I
>     make a call I get this:
> 
> 
>     Jan  8 13:04:06 DEBUG[12252]: chan_unicall.c:2000 unicall_exception:
>     Exception on 19, channel 1
>     Jan  8 13:04:06 WARNING[12252]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1      <- 1101
>     [1/      40/Seize /Idle         ]
>     Jan  8 13:04:06 WARNING[12252]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1 0 on  ->
>     [2/      40/Group I /Idle         ]
>     Jan  8 13:04:11 WARNING[12252]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1 R2 prot. err.
>     [2/      40/Group I /DNIS         ] cause 32769 - T1 timed out
>     Jan  8 13:04:11 WARNING[12252]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1 0 off ->
>     [1/       1/Idle /Idle         ]
>     Jan  8 13:04:11 WARNING[12252]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1 1001  ->
>     [1/       1/Idle /Idle         ]
>     Jan  8 13:04:11 WARNING[12252]: chan_unicall.c:2644 handle_uc_event:
>     Unicall/1 event Protocol failure
>          -- Unicall/1 protocol error. Cause 32769
>     Jan  8 13:04:11 WARNING[12252]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1 Channel echo cancel
>     Jan  8 13:04:11 DEBUG[12252]: chan_unicall.c:955 unicall_disable_ec:
>     disabled echo cancellation on
>     channel 1
> 
>     Jan  8 13:04:11 WARNING[12250]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1      <- 1001
>     [1/       1/Idle /Idle         ]
>     Jan  8 13:04:11 WARNING[12250]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1 1001  ->
>     [1/       1/Idle /Idle         ]
>          -- Hungup 'UniCall/1-1'
> 
> 
>     What does "- Unicall/1 protocol error. Cause 32769" mean, and can
>     anyone help me.
> 
>     --


-- 
thanks,
Yusuf

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.