[asterisk-users] Dimensioning a 50 sip phone installation

[Erick Perez]

On 1/4/07, Noah Miller <noahisaacmiller at gmail.com> wrote:
> Hi Erick -
>
> > Some help with dimensioning the server will be gladly accepted.
> >
> > -50 sip phones (g729) or g711(to avoid transcoding) in LAN
> > -an asterisk server (1.4) doing normal pbx functions + voicemail in the same LAN
> > -Some sporadic conferencing with no more than 2 sip phones and maybe 2
> > or 3 calls coming from the E1 for a total of 5 people in a conference.
> >
> > The asterisk server will get an E1(pri) via one fonebridge (TDMoE)
> >
> > I was thinking of an HP DL140 with two 250gig sata disks and one
> > 3.8Xeon CPU with 2gig RAM.
>
> You'll do absolutely fine with this setup.  I have an office that has
> about the same amount of phones and traffic as this (all using g711),
> but probably with quite a bit more conferencing.  It runs on a Xeon
> 2.8ghz, 1GB Ram, 2 73 GB SCSI Raid 1.
>
>
> > Also, does a fonebridge setup suffers from the fact that 1.4 has no
> > PRI/R2 support (as said in a previous post by someone else).
>
> I've been considering buying one of these, but don't have one yet.  If
> anyone can comment, I'd like an answer, too.
>
> - Noah
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

thanks Noah, you have been very helpful.

-- 
------------------------------------------------------------
Erick Perez
Panama Sistemas
Integradores de Telefonia IP y Soluciones Para Centros de Datos
Panama, Republica de Panama
Cel Panama. +(507) 6694-4780
------------------------------------------------------------