[asterisk-users] Sangoma Remora A202

[Todd H]

For those following this discussion, below is my original message to  
the list and a reply from Sangoma Tech Support.
   -t-

On Jan 3, 2007, at 8:43 AM, Todd H wrote:

> Hi - I just got a Sangoma A200 card with a single 2FXO module and  
> what appears to be an empty module. I put the card in my Dell  
> GX260, but the power light on the front of the box just blinks and  
> won't power up.  I did take the power cable from the CDROM to put  
> on the card - I don't need the CDROM right now..
>
> I'm looking for direction in getting this card working - I  
> currently have a new Trixbox, hoping it'll have the software for  
> this card already.  If not, I'll be back asking what drivers I  
> need.  Sangoma seems to have a lack of documentation, but it may  
> just be me....
>  thanks
>     Todd



> On Jan 4, 2007, at 3:03 PM, David Yat Sin wrote:
>> Hi Todd,
>>
>> We just looked at the blank modules that we usually ship to insert  
>> in the empty slots of the A200, and there is a small trace that  
>> connects two pins.
>>
>> These two pins have been switched to a different function in our  
>> newer A200 builds and this is causing a short.
>>
>> Please do not use the blank module. We will either make new blank  
>> modules or stop shipping the blank modules.
>>
>> I guess this was not an issue with the FXO module in 2nd slot, but  
>> rather an issue with the blank module.
>>
>> Regards,
>> David Yat Sin
>> tel: 905.474.1990 x119
>> tel: 800.388.2475 x119
>> fax: 905.474.9223
>> msn: david.ys1 at hotmail.com
>> wiki: wiki.sangoma.com
>>
>>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070104/64da9871/attachment.htm