[asterisk-users] [Fwd: PRI Problems]

[Rob Schall]

<Correction in my zapata.conf file I used>

Hey Everyone,

So this is a problem I've been having for sometime now. I sent a few
messages to the list with no luck.

The problem is that when people dial into the Asterisk system using DID
numbers, it works the first time or 2, then I get busy signals.
A friend recommended I clear out the zapata and zaptel, start over, and
recreate my wanpipe stuff. He thought the problem was with the spans
themselves.

However, when I use the following information, and restart wanrouter, I
get an error.

Zapata.conf

[channels]

language=en
context=internal
switchtype=national
pridialplan=unknown
signalling=pri_cpe
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
group=0
channel => 1-23

group=1
signalling=em_w
channel => 25-47


Zaptel.conf

span=1,1,0,esf,b8zs
span=2,1,0,esf,b8zs
bchan=1-23
dchan=24
e&m=25-44



-------------ERROR----------------
Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: Clear channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: D-channel (Default) (Slaves: 24)
Channel 25: E & M (Default) (Slaves: 25)
Channel 26: E & M (Default) (Slaves: 26)
Channel 27: E & M (Default) (Slaves: 27)
Channel 28: E & M (Default) (Slaves: 28)
Channel 29: E & M (Default) (Slaves: 29)
Channel 30: E & M (Default) (Slaves: 30)
Channel 31: E & M (Default) (Slaves: 31)
Channel 32: E & M (Default) (Slaves: 32)
Channel 33: E & M (Default) (Slaves: 33)
Channel 34: E & M (Default) (Slaves: 34)
Channel 35: E & M (Default) (Slaves: 35)
Channel 36: E & M (Default) (Slaves: 36)
Channel 37: E & M (Default) (Slaves: 37)
Channel 38: E & M (Default) (Slaves: 38)
Channel 39: E & M (Default) (Slaves: 39)
Channel 40: E & M (Default) (Slaves: 40)
Channel 41: E & M (Default) (Slaves: 41)
Channel 42: E & M (Default) (Slaves: 42)
Channel 43: E & M (Default) (Slaves: 43)
Channel 44: E & M (Default) (Slaves: 44)

44 channels configured.

ZT_SPANCONFIG failed on span 1: Invalid argument (22)