[asterisk-users] Polycom Power Specs

[Bas van der Veen]

I haven't read trough the thread well enough. The 600 is 12V 1.5A 
indeed. Too bad they don't all have the same voltage.

LST wrote:
> The IP600 is 12v!!!  I fried a 600 when I used power adapter from 601.
> 
> 
> On 1/3/07, *Alvin Austin* <aan at crlogic.com <mailto:aan at crlogic.com> > wrote:
> 
>     FWIW, our Polycom IP601 phones use a transformer with output: 24VDC
>     500mA (center contact is positive).
> 
>     A Polycom reseller (or Polycom sales) could probably give you
>     information on these other two models.
> 
>     Alvin
> 
>     Peder @ NetworkOblivion wrote:
>      > Does anybody happen to know the input power specs for the Polycom IP
>      > 500 and IP 600?  We've mixed up our power supplies and we've got a
>      > whole box of them and can't figure out which go to the Polycoms.  I
>      > would rather not kill the phones by trying random ones....
>      >
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users