[asterisk-users] vzaphfc?

[Remco Barendse]

On Fri, 29 Dec 2006, Julian J. M. wrote:

> It's not necessary to recompile the kernel for mISDN support. Check
> http://www.laimbock.com/asterisk/
>
> Grab the mISDN source rpm, and build it.
>
> $ wget 
> http://www.xs4all.nl/~pjl/downloads/asterisk/srpms/mISDN-cvs20061107-2_fc6.lc.src.rpm
> $ rpmbuild --rebuild mISDN-cvs20061107-2_fc6.lc.src.rpm
>
> then check /usr/src/redhat/RPMS/i386/
> You should have the kernel modules and userspace applications. Once
> installed, I could enable chan_misdn in asterisk 1.4 without issue,
> and it's working great in NT mode with ISDN phones. I haven't tested
> asterisk 1.2, but there is no it shouldn't work as well.

I deleted all the bristuff modules i could find plus the old asterisk 
libs, compiled zaptel, libpri and asterisk from scratch but can't get it 
to work.

First I get errors about something I guess is missing from misdn, later 
errors about zaptel.

I'll just toss the HFC-S card and convert the ISDN line to analog.

These are the errors :
.mISDN_close: fid(14) isize(131072) inbuf(0x2a96ee6010) irp(0x2a96ee6010) 
iend(0x2a96ee6010)
Jan  2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config: 
misdn.conf: "ports=(null)" (section: intern) invalid or out of range. 
Please edit your misdn.conf and then do a "misdn reload".
Jan  2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config: 
misdn.conf: "ports=(null)" (section: first_extern) invalid or out of 
range. Please edit your misdn.conf and then do a "misdn reload".
Jan  2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config: 
misdn.conf: "ports=(null)" (section: second_extern) invalid or out of 
range. Please edit your misdn.conf and then do a "misdn reload".
P[ 0] Got: 1 from get_ports
P[ 0] -- mISDN Channel Driver Registred -- (BE AWARE THIS DRIVER IS 
EXPERIMENTAL!)
......Jan  2 23:07:23 ERROR[25747]: chan_zap.c:10603 setup_zap: Unknown 
signalling method 'bri_cpe_ptmp'
Jan  2 23:07:23 ERROR[25747]: chan_zap.c:10228 setup_zap: Signalling must 
be specified before any channels are.
Jan  2 23:07:23 WARNING[25747]: loader.c:414 __load_resource: chan_zap.so: 
load_module failed, returning -1
Jan  2 23:07:23 WARNING[25747]: loader.c:554 load_modules: Loading module 
chan_zap.so failed!

Cheers!