[asterisk-users] chan_sip.c:1968 create_addr: No such host:

[Ioan Indreias]

Hello,
I'm not familiar with A2billing but for me it is strange that you "dial" 
SIP/777 - 777 should be an extension.

Could you post your "user" context - or at least the one which direct 
you to:
Dial("SIP/9614-3896", "SIP/777|200|rt")

Best regards,
## nini @ www.modulo.ro ##



broadbandvoice at comcast.net wrote:
> Thanks Rob, that helped a little bit but now getting a different kind 
> of error:
>  
>     -- Executing Dial("SIP/9614-3896", "SIP/777|200|rt") in new stack
> Feb 18 06:00:30 NOTICE[12236]: app_dial.c:1011 dial_exec_full: Unable 
> to create channel of type 'SIP' (cause 3 - No route to destination)
>   == Everyone is busy/congested at this time (1:0/0/1)
>   == Auto fallthrough, channel 'SIP/9614-3896' status is 'CHANUNAVAIL'
>  
>
>     -------------- Original message --------------
>     From: Rob Hillis <rob at hillis.dyndns.org>
>     I guess the obvious question would be whether the "callingcard"
>     context is included into the context that the call is coming
>     from.  That's the usual reason for a failure like this.
>
>
>     broadbandvoice at comcast.net wrote:
>>     I have followed all the install note for A2billing and have
>>     everything installed and configured and my asterisk works except
>>     the callingcard application.
>>     Added the following
>>     [callingcard]
>>     ; CallingCard application
>>     exten => 777,1,Answer
>>     exten => 777,2,Wait,2
>>     exten => 777,3,DeadAGI,a2billing.php
>>     exten => 777,4,Wait,2
>>     exten => 777,5,Hangup
>>     I am using 777 as the calling card application. when I call that
>>     extension, instead of getting " please enter you pin number" it
>>     fails and this is the output from the cli:
>>     -- Executing Dial("SIP/9614-e7ba", "SIP/777|200|rt") in new stack
>>     Feb 18 05:03:38 WARNING[11725]: chan_sip.c:1968 create_addr: No
>>     such host: 777
>>     Feb 18 05:03:38 NOTICE[11725]: app_dial.c:1011 dial_exec_full:
>>     Unable to create channel of type 'SIP' (cause 3 - No route to
>>     destination)
>>       == Everyone is busy/congested at this time (1:0/0/1)
>>       == Auto fallthrough, channel 'SIP/9614-e7ba' status is
>>     'CHANUNAVAIL'
>>     Any Help will be greatly appreciated.
>>     ------------------------------------------------------------------------
>>
>>     _______________________________________________
>>     --Bandwidth and Colocation provided by Easynews.com --
>>
>>     asterisk-users mailing list
>>     To UNSUBSCRIBE or update options visit:
>>        http://lists.digium.com/mailman/listinfo/asterisk-users
>>       
>
>
> ------------------------------------------------------------------------
>
> Subject:
> Re: [asterisk-users] chan_sip.c:1968 create_addr: No such host:
> From:
> Rob Hillis <rob at hillis.dyndns.org>
> Date:
> Sun, 18 Feb 2007 12:43:59 +0000
> To:
> Asterisk Users Mailing List - Non-Commercial Discussion 
> <asterisk-users at lists.digium.com>
>
> To:
> Asterisk Users Mailing List - Non-Commercial Discussion 
> <asterisk-users at lists.digium.com>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>