[asterisk-users] TDM02B not working

Remco Barendse asterisk at barendse.to
Sun Feb 11 09:37:31 MST 2007


Aarghh nevermind, my bad

A stock TDM02B comes with modules installed in slot 3 and 4, not 1 and 2.

For whoever might have the same problem and finds this post change below 
to read:
fxsks=3-4
channel=>3-4

On Sun, 11 Feb 2007, Remco Barendse wrote:

> I am trying to reconfigure an asterisk box that was using an HFC-S card with 
> bristuff but is now using 2 analog lines therefore I want to use the TDM02B 
> to connect to two POTS lines. The TDM02B has 2 red modules.
>
> I have this in /etc/zaptel.conf
> loadzone=nl
> defaultzone=nl
> fxsks=1-2
>
> I have /etc/asterisk/zapata.conf
> signalling=fxs_ks
> echocancel=yes
> echocancelwhenbridged=yes
> echotraining=400
>
> immediate=yes
> usecallerid=yes
> callerid=asreceived
> cidsignalling=dtmf
> cidstart=polarity
> hidecallerid=no
> callwaiting=no
> callwaitingcallerid=no
> adsi=no
> context=inbound-analog
> channel=>1-2
>
> The output of ztcfg -vvvvv is :
> Channel map:
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> 2 channels configured.
>
> so far so good, but when i try asterick -cvvvvvvvv :
>  == Parsing '/etc/asterisk/zapata.conf': Found
> Feb 11 16:48:15 WARNING[19083]: chan_zap.c:1072 zt_open: Unable to specify 
> channel 1: No such device
> Feb 11 16:48:15 ERROR[19083]: chan_zap.c:7034 mkintf: Unable to open channel 
> 1: No such device
> here = 0, tmp->channel = 1, channel = 1
> Feb 11 16:48:15 ERROR[19083]: chan_zap.c:10462 setup_zap: Unable to register 
> channel '1-2'
> Feb 11 16:48:15 WARNING[19083]: loader.c:414 __load_resource: chan_zap.so: 
> load_module failed, returning -1
> Feb 11 16:48:15 WARNING[19083]: loader.c:554 load_modules: Loading module 
> chan_zap.so failed!
>
> Why doesn't asterisk find the channel that ztcfg does see?
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>


More information about the asterisk-users mailing list