AW: [asterisk-users] IAX2 softphones can't (won't?) use PRI trunks....

[Roland Ndaka Fru]

Try latest IAX2 YakaPhone which you can get from www.yakasoftware.com.

 

  _____  

Von: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] Im Auftrag von ismail loo
Gesendet: 05 February 2007 17:16
An: Asterisk Users Mailing List - Non-Commercial Discussion
Betreff: Re: [asterisk-users] IAX2 softphones can't (won't?) use PRI
trunks....

 

Try latest version of iaxLite softphone. The testing result here is that it
could work with PRI or IAX2 trunks.



 

2007/1/16, Patrick W. Foster <pwf at unids.com>: 

I have call center PCs that switch between an IBEAM SIP softphone and a NEBU
IAX softphone (for reasons

that aren't germane here).   The SIP softphones work fine, but the IAX
softphones get a fast busy unless I give

them an IAX trunk to use, instead of the PRI trunks that all the other
phones are using.  I am using Asterisk 1.2.3.

svn rev 47264.

 

I've appended a sample call trace.   The call fails through all the
configured PRI trunks to the IAX trunk with a CHANUNAVAIL error, whilst

the SIP phones are actively calling out on those same PRI trunks.   The
numbers dialed are 10 digits with no prefix.  I am hopeful that

someone will recognize the issue and give me a pointer on where to look for
the problem.

 

- Registered IAX2 '4414' (AUTHENTICATED) at 192.168.1.102:4569
<http://192.168.1.102:4569/> 
    -- Accepting AUTHENTICATED call from 192.168.1.102
<http://192.168.1.102/> :
       > requested format = alaw,
       > requested prefs = (),
       > actual format = ulaw, 
       > host prefs = (ulaw|alaw|gsm),
       > priority = mine
    -- Executing Set("IAX2/4414-6", "EMERGENCYROUTE=YES") in new stack
    -- Executing Macro("IAX2/4414-6", "dialout-trunk|4|xxxnnnnnnn||") in new
stack 
    -- Executing GotoIf("IAX2/4414-6", "1?3:2") in new stack
    -- Goto (macro-dialout-trunk,s,3)
    -- Executing Macro("IAX2/4414-6", "user-callerid") in new stack
    -- Executing GotoIf("IAX2/4414-6", "0?report") in new stack 
    -- Executing GotoIf("IAX2/4414-6", "0?start") in new stack
    -- Executing Set("IAX2/4414-6", "REALCALLERIDNUM=4414") in new stack
    -- Executing NoOp("IAX2/4414-6", "REALCALLERIDNUM is 4414") in new stack

    -- Executing Set("IAX2/4414-6", "AMPUSER=4414") in new stack
    -- Executing Set("IAX2/4414-6", "AMPUSERCIDNAME=User32-IAX") in new
stack
    -- Executing GotoIf("IAX2/4414-6", "0?report") in new stack 
    -- Executing Set("IAX2/4414-6", "CALLERID(all)=User32-IAX <4414>") in
new stack
    -- Executing NoOp("IAX2/4414-6", "Using CallerID "User32-IAX" <4414>")
in new stack 
    -- Executing Macro("IAX2/4414-6", "record-enable|4414|OUT") in new stack
    -- Executing GotoIf("IAX2/4414-6", "0 > 0?2:4") in new stack
    -- Goto (macro-record-enable,s,4) 
    -- Executing AGI("IAX2/4414-6",
"recordingcheck|20070115-121440|1168881280.2233") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
  recordingcheck|20070115-121440|1168881280.2233: Outbound recording not
enabled 
    -- AGI Script recordingcheck completed, returning 0
    -- Executing NoOp("IAX2/4414-6", "No recording needed") in new stack
    -- Executing Macro("IAX2/4414-6", "outbound-callerid|4") in new stack 
    -- Executing GotoIf("IAX2/4414-6", "1?start") in new stack
    -- Goto (macro-outbound-callerid,s,3)
    -- Executing NoOp("IAX2/4414-6", "REALCALLERIDNUM is 4414") in new stack

    -- Executing Set("IAX2/4414-6", "USEROUTCID=""Business Name"
<xxx-nnn-nnnn>"") in new stack
    -- Executing Set("IAX2/4414-6", "EMERGENCYCID=") in new stack 
    -- Executing Set("IAX2/4414-6", "TRUNKOUTCID=""Business Name"
<xxx-nnn-nnnn>"") in new stack
    -- Executing GotoIf("IAX2/4414-6", "0?trunkcid") in new stack 
    -- Executing GotoIf("IAX2/4414-6", "1?trunkcid") in new stack
    -- Goto (macro-outbound-callerid,s,11)
    -- Executing GotoIf("IAX2/4414-6", "0?usercid") in new stack 
    -- Executing Set("IAX2/4414-6", "CALLERID(all)=""Business Name"
<xxx-nnn-nnnn>"") in new stack
    -- Executing GotoIf("IAX2/4414-6", "0?report") in new stack 
    -- Executing Set("IAX2/4414-6", "CALLERID(all)=""Business Name"
<xxx-nnn-nnnn>"") in new stack
    -- Executing NoOp("IAX2/4414-6", "CallerID set to ""Business Name"
<xxx-nnn-nnnn>"") in new stack 
    -- Executing Set("IAX2/4414-6", "GROUP()=OUT_4") in new stack
    -- Executing GotoIf("IAX2/4414-6", "0?108") in new stack
    -- Executing Set("IAX2/4414-6", "DIAL_NUMBER=xxxnnnnnnn") in new stack 
    -- Executing Set("IAX2/4414-6", "DIAL_TRUNK=4") in new stack
    -- Executing AGI("IAX2/4414-6", "fixlocalprefix") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix 
    -- AGI Script fixlocalprefix completed, returning 0
    -- Executing Set("IAX2/4414-6", "OUTNUM=xxxnnnnnnn") in new stack
    -- Executing Set("IAX2/4414-6", "custom=ZAP/g0") in new stack 
    -- Executing GotoIf("IAX2/4414-6", "0?16") in new stack
    -- Executing Dial("IAX2/4414-6", "ZAP/g0/xxxnnnnnnn|120|r") in new stack
  == Everyone is busy/congested at this time (1:0/0/1) 
    -- Executing Goto("IAX2/4414-6", "s-CHANUNAVAIL|1") in new stack
    -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
    -- Executing NoOp("IAX2/4414-6", "Dial failed due to CHANUNAVAIL") in
new stack 


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com  <http://easynews.com/>
--

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070205/82fa700b/attachment.htm