[asterisk-users] Zap channels for HFC-S PCI card not responding

[Jaap Winius]

Quoting Tzafrir Cohen <tzafrir.cohen at xorcom.com>:

> What do you mean by "busy"? What exactly do you see?

This kind of thing:

# cat /proc/zaptel/*

     Span 1: ZTHFC1 "HFC-S PCI A Zaptel Driver card 0 [TE]" (MASTER) AMI/CCS

                1 ZTHFC1/0/1 Clear (In use)
                2 ZTHFC1/0/2 Clear (In use)
                3 ZTHFC1/0/3 HDLCFCS (In use)
     Span 2: ZTHFC1 "HFC-S PCI A ISDN card 1 [TE]" AMI/CCS

                4 ZTHFC1/0/1 Clear (In use)
                5 ZTHFC1/0/2 Clear (In use)
                6 ZTHFC1/0/3 HDLCFCS (In use)


Any attempts to call out result in the following CLI output:

[Dec 30 16:15:41] WARNING[12918]: app_dial.c:1130 dial_exec_full:
Unable to create channel of type 'Zap' (cause 34 - Circuit/channel
congestion)
    == Everyone is busy/congested at this time (1:0/1/0)
    == Auto fallthrough, channel 'SIP/1000-081ff9f8' status is 'CONGESTION'
[Dec 30 16:15:41] NOTICE[12918]: cdr.c:434 ast_cdr_free: CDR on
channel 'SIP/1000-081ff9f8' not posted


CLI> zap restart:
      Destroying channels and reloading zaptel configuration.
       == Parsing '/etc/asterisk/zapata.conf': Found
       == Parsing '/etc/asterisk/zapata-channels.conf': Found
     [Dec 30 16:32:41] WARNING[13612]: chan_zap.c:1081 zt_open: Unable to
     specify channel 1: Device or resource busy
     [Dec 30 16:32:41] ERROR[13612]: chan_zap.c:7501 mkintf: Unable to open
     channel 1: Device or resource busy
     here = 0, tmp->channel = 1, channel = 1
     [Dec 30 16:32:41] ERROR[13612]: chan_zap.c:12266 build_channels: Unable
     to register channel '1-2'
     [Dec 30 16:32:41] WARNING[13612]: chan_zap.c:11554 zap_restart: Reload
     channels from zap config failed!


This and more is from my previous message (sorry, that didn't just  
contain configuration information).

Thanks,

Jaap