[asterisk-users] X100P Woes

[Alex Balashov]

Does it show up in 'lspci'?

On Mon, 24 Dec 2007, Bob Smither wrote:

> I am out of things to try on getting an X100P card to work.
>
> I have a P4 system with CentOS 5.1 installed (network install).  After
> adding required packages I compiled (apparently successful) and
> installed Zaptel in anticipation of installing Asterisk.
>
> I simply cannot get the X100P card to be recognized.  I have tried bios
> setting of PnPOS no and PnPOS yes, tried the card in different slots,
> disabled all the unused motherboard devices to free up interrupts, etc.
>
> The card works flawlessly in a CentOS 4.4 install on an old K6-2
> motherboard.
>
> If I put an ethernet card in a PCI slot (in addition to the one on the
> motherboard), it is recognized and configured during boot so I assume
> the interrupt hardware is working on the mother board.
>
> I would really appreciate any suggestions of what I could try here.
>
> Thanks!
> -- 
> Bob Smither <Smither at C-C-I.com>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

--
Alex Balashov
Evariste Systems
Web    : http://www.evaristesys.com/
Tel    : +1-678-954-0670
Direct : +1-678-954-0671