[asterisk-users] OpenVox A800P01 and ZT_CHANCONFIG failed

[nik600]

maybe i've guess the problem!

on the same server, i've got a B800P.

I've tried to manually remove all isdn module and zaptel modules.

After that, i've done

modprobe zaptel
modprobe opvxa1200

and now the card has been correctly registered!


On Dec 24, 2007 2:32 PM, nik600 <nik600 at gmail.com> wrote:
> On 12/23/07, Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:
> > On Sun, Dec 23, 2007 at 07:05:37PM +0100, nik600 wrote:
> > > Hi
> > >
> > > i've got an openvox a800p01 with 1 FXO and 4 FSX
> > >
> > > i've done the following:
> > > - downloaded zaptel-1.4.7.1
> > > > >> - downloaded the file opvxa1200.c
> > > > >> - copied in zaptel-1.4.7.1/
> > > > >> - edited makefile adding opvxa1200 in the modules and the voice
> > > > >> opvxa1200.o : zaptel.h wctdm.h
> > > > >> - edited zaptel.sysconfig adding
> > > MODULES="$MODULES opvxa1200" # OPENVOXA1200P
> > >
> > > after that ive done:
> > > make clean", "make", "make install
> > > finally, if i do:
> > > modprobe opvxa1200
> >
> > dmesg | tail
>
>
> Zapata Telephony Interface Registered on major 196
> Zaptel Version: 1.4.7.1
> Zaptel Echo Canceller: MG2
>
>
> >
> > >
> > > if i launch ./zapconf
> >
> > cat /proc/zaptel/*
>
> root at datatwo:~# cat /proc/zaptel/
> cat: /proc/zaptel/: Is a directory
> root at datatwo:~# ls -la /proc/zaptel/
> total 0
> dr-xr-xr-x  2 root root 0 2007-12-24 14:37 ./
> dr-xr-xr-x 76 root root 0 2007-12-23 21:18 ../
>
>
> It seems that the module doesn't recognize the card!... but the card
> is recognized by lspci...
>
> --
> /*************/
> nik600
> https://sourceforge.net/projects/ccmanager
> https://sourceforge.net/projects/reportmaker
> https://sourceforge.net/projects/nikstresser
>



-- 
/*************/
nik600
https://sourceforge.net/projects/ccmanager
https://sourceforge.net/projects/reportmaker
https://sourceforge.net/projects/nikstresser