[asterisk-users] OpenVox A800P01 and ZT_CHANCONFIG failed

[nik600]

On Dec 23, 2007 7:24 PM, Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:

>
> xpp/utils/zapconf ?

yes

>
> >
> > the file /etc/zaptel.conf still remains empty,
>
> Which suggests that the module hasn't really loaded or anyway did not
> register channels. Or it has, but they are for empty slots.
>

can you suggest me some command to enable the debug of the module?

the card has phisically installed the module, i've checked it. And it
is correctly powered.

Do you know some method to check if the card is working?

here the lspci ouput:

> 00:0e.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
> interface
>         Subsystem: Unknown device 9100:0001
>         Flags: bus master, medium devsel, latency 32, IRQ 10
>         I/O ports at a800 [size=256]
>         Memory at f8000000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [40] Power Management version 2
>

-- 
/*************/
nik600
https://sourceforge.net/projects/ccmanager
https://sourceforge.net/projects/reportmaker
https://sourceforge.net/projects/nikstresser