[asterisk-users] Unicall protocol error. Cause 32776

Moises Silva moises.silva at gmail.com
Fri Dec 14 13:09:12 CST 2007


Roger,

I think you should call your telco support and ask them if they
receive your sizing and if they are sending the seize ack.

On Dec 14, 2007 5:57 AM, Roger C. Beraldi Martins
<rogerberaldi at gmail.com> wrote:
> Dears,
>
> Here is the logs when I put loglevel=255 on unicall.conf, I have use
> max-wait = 10000
>
>
> [Dec 14 09:53:42] DEBUG[28143] chan_unicall.c: unicall_call called - 'g1'
> [Dec 14 09:53:42] DEBUG[28143] chan_unicall.c: unicall_call caller id -
> '3007'
> [Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Call
> control(1)
> [Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Make call
> [Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Creating a
> new call with CRN 32769
> [Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 0001  ->
> [1/DIALING /Seize         /Idle         ]
> [Dec 14 09:53:42] VERBOSE[28143] logger.c:     -- Called g1
> [Dec 14 09:53:42] NOTICE[28143] chan_unicall.c: Unicall/1 event Dialing
> [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1
> seize_ack_wait_expired
> [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 R2 prot.
> err. [1/DIALING /Seize         /Idle         ] cau
> se 32776 - Seize ack timed out
> [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 1001  ->
> [1/IDLE    /Idle          /Idle         ]
> [Dec 14 09:53:53] NOTICE[28143] chan_unicall.c: Unicall/1 event Protocol
> failure
> [Dec 14 09:53:53] ERROR[28143] chan_unicall.c: Unicall/1 protocol error.
> Cause 32776
> [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Channel
> echo cancel
> [Dec 14 09:53:53] DEBUG[28143] chan_unicall.c: disabled echo cancellation on
> channel 1
> [Dec 14 09:53:53] WARNING[28143] app_dial.c: Unable to forward voice or dtmf
> [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Channel
> gains
> [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Channel
> switching
> [Dec 14 09:53:53] DEBUG[28143] chan_unicall.c: Hangup: channel: 1 index = 0,
> normal = 10, callwait = -1, thirdcall = -1
> [Dec 14 09:53:53] DEBUG[28143] chan_unicall.c: Updated conferencing on 1,
> with 0 conference users
> [Dec 14 09:53:53] VERBOSE[28143] logger.c:     -- Hungup 'UniCall/1-1'
> [Dec 14 09:53:53] VERBOSE[28143] logger.c:   == Everyone is busy/congested
> at this time (1:0/0/1)
> [Dec 14 09:53:53] DEBUG[28143] app_macro.c: Executed application: Dial
>
>
> Best Regards,
>
>
>
> --
> Atenciosamente,
>
> Roger C. Beraldi Martins
> Fone: 41-8828-7068
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
"Within C++, there is a much smaller and cleaner language struggling
to get out."



More information about the asterisk-users mailing list