[asterisk-users] X100P Fxo card headaches

Jonn R Taylor jonnt at taylortelephone.com
Tue Dec 11 13:20:16 CST 2007


The old x100p cards where 5 volt pci cards. I had this same problem and it was the type of pci slot that I had the card plugged into.

Jonn

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chris Boczko
Sent: Tuesday, December 11, 2007 1:02 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] X100P Fxo card headaches

Hello List,

Thanks for the replies...currently

Still doing the same after adding channel=1 to the /etc/zaptel.conf

my zapata.conf looks like

orange:~# more /etc/asterisk/zapata.conf
[trunkgroups]
[channels]
usecallerid=yes
hidecallerid=no
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
context=incoming
signaling=fxs_ks
group=1
channel=>1

orange:~#

Im getting pretty sure now that its the card, i borrowed a TDM400B
(the 3port model) from a friend, and it came up just fine (with a
quick change to zaptel.conf and zapata.conf)....im thinking..... duff
card

Ive got a linksys SPA-3102 on order to replace this card...

but i would still like to confirm if it is the card thats duff or
something with my config, more of a "geeky pride" excercise than
anything else.

Cheers

Chris

On 11/12/2007, Drew Gibson <drew at oanda.com> wrote:
> Chris Boczko wrote:
> > Hello List,
> >
> > Im just dipping my feet into the asterisk world, and im having major
> > fxo problems
> >
> > Im running Asterisk (from svn) + libpri (from svn) + asterisk-addons
> > (from svn) + asterisk gui (svn 1.4 branch) + zaptel (svn 1.4) on a
> > Debian Etch box, with 1gb ram, running all of the services for my home
> > server (web / db / music server etc), and i would like to run my PSTN
> > line from Kingston Comms, but i can't get this box the recoginsie this
> > line!
> >
> > The X100p is a cheap clone i got off ebay for a tenner, so im not
> > expecting much, i know they have echo issues, but im going to upgrade
> > to a SPA3012 / TDM400B when i have the cash.
> >
> > Ztcfg -vv reports
> >
> > orange:~# ztcfg -vv
> >
> > Zaptel Version: SVN-branch-1.4-r3374
> > Echo Canceller: MG2
> > Configuration
> > ======================
> >
> >
> > Channel map:
> >
> > Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> >
> > 1 channels to configure.
> >
> > orange:~#
> >
> >
> > and my zaptel.conf file contains
> >
> > orange:~# more /etc/zaptel.conf
> > fxsks=1
> > loadzone=uk
> > defaultzone=uk
> > orange:~#
> >
> > but zap show status in the command line shows
> >
> > orange*CLI> zap show status
> > Description                              Alarms  IRQ    bpviol CRC4
> > Fra Codi Options  LBO
> > Wildcard X100P Board 1                   OK      0      0      0
> > CAS Unk  YEL      0 db (CSU)/0-133 feet (DSX-1)
> > orange*CLI>
> >
> > and i think the Unk means unknown...?
> >
> > Does anyone have any ideas on how to get this line to work, ive
> > followed every howto i can find, and google seems to be comming up
> > short, as far as i can see, ztcfg should report the card as
> > configured, but it isn't, and ive no idea why.
> >
> > Hope you can help
> >
> > Chris
> >
> >
>
> Try adding channels=1 to the end of your zaptel.conf to assign the
> settings you have made to a channel.
>
> regards,
>
> Drew
>
> --
> Drew Gibson
>
> Systems Administrator
> OANDA Corporation
> www.oanda.com
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users






More information about the asterisk-users mailing list