[asterisk-users] Red Alarm TE420 with E1s - R2

[Richard Lyman]

I agree, if you never changed the jumper.

I have never noticed, does the output of ztcfg change is it set to E1?

Roger C. Beraldi Martins wrote:
> Richard,
>
> Thanks understood I will use this configurations for de last span. But
> I think the Carlos Chávez are right about this. I realy forgot to put
> jumpers to set E1 mode in TE420 card, if it's come with the jumpers
> open (and I believe this) probably this is the problem.
>
> I don't know what parameter must be put on the module load to make
> card up in E1 mode,  then tomorrow I will have physical access on the
> card and I will put all jumpers closed.
>
> Thanks to all again, then I write with the result.
>
>
> 2007/12/3, Richard Lyman <pchammer at dynx.net>:
>   
>> #span=4,0,0,cas,hdb3
>>
>> ^ uncomment that
>>
>> and
>>
>> cas=1-15:1101
>> cas=17-31:1101
>>
>> cas=32-46:1101
>> cas=48-62:1101
>>
>> cas=63-77:1101
>> cas=79-93:1101
>>
>> unused=94-124   #whatever your ending is
>>
>>     
*snipped