[asterisk-users] HDL F10 brazilian doorbell device + TDM2400

[gincantalupo]

Hi Matthew,
I asked HDL  some docs about their product but nothing is explained 
about signalling.
I've tried reversepolarity and busydetect without success.
I know 4 things:
a) it works with analogic PBX
b) both F10 and called party phone are connected to the PBX so no telco 
line is involved
c) the F10 user hears a strange long noise instead of a hangup noise 
(even if Asterisk gives an Hangup message)
d) I'm using the immediate=yes mode (it is not a normal analogic phone) 
and this is mandatory to make F10 work correctly

I'm sorry I do not have more infos.

Giorgio


Matthew Fredrickson wrote:
> gincantalupo wrote:
>   
>> Hi,
>> I'm trying to connect an HDL F10 device for a friend living in Brazil to 
>> the TDM2400 on his Asterisk server.
>> That device should behave like a normal doorbell and it is if connected 
>> to an analog PBX.
>> I connected to the TDM2400 and everything works fine except for one 
>> thing: when the called party hangs up his phone, the F10 HDL device does 
>> not hang up.
>> I'm not brazilian and not living there so I do not know if its a matter 
>> of signalling type or what.
>> Is there anbody who tried this stuff or similar?
>>     
>
> It sounds like there might be an issue here related to not having 
> disconnect supervision enabled.  Can this device provide come sort of 
> disconnect supervision?
>
>   


-- 

_________________________________________________
Giorgio Incantalupo, mailto:gincantalupo at fgasoftware.com
FG&A srl - http://www.fgasoftware.com -
Voice at Work - The Agile PBX http://www.voiceatwork.eu
Tel: 02997663.14, Fax: 0291390172