[asterisk-users] Dell SC1430 + Digium TE110P = Digital Noise in PRI

[Steve Totaro]

That is why I suggested Sangoma.  Ask them if you can return it if it 
does not fix your problem.

It is alot easier than disabling things in BIOS and hunting for the 
elusive "noises".

Digium would have you believe that the problem is the "Dell box" but if 
a Sangoma card works perfectly in the same box, then where is the 
"actual" problem?

Anyways, if you are set on Digium, call their support and give them 
SSH.  They may be your best bet in fixing the issue.

Thanks,
Steve

Marc Patino Gómez wrote:
> Hi Steve,
>
> All my cards are Digium, I tried diferent Digium cards and I had the 
> same problem.
>
> Regards,
>
> Marc
>
>
> Steve Totaro wrote:
>   
>> Marc Patino Gómez wrote:
>>   
>>     
>>> Hi list,
>>>
>>> I have a terrible noise issue with Dell SC1430 + Digium TE110P. The 
>>> digium card is not sharing interrupts with any other device, as I saw in 
>>> Dell's BIOS and also with "lspci -vb" command.
>>>
>>> After changing coax wire, UTP, balum, digium card ... I have found that 
>>> the problem is in Dell box, so now I'm running the same Asterisk config 
>>> in other server with the same Digium card and there is no noise in PRI.
>>>
>>> Any advice to solve the problem with Dell box?
>>>
>>> Regards,
>>>
>>> Marc
>>>
>>>   
>>>     
>>>       
>> Try a Sangoma card?
>>
>> Thanks,
>> Steve Totaro
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>   
>>     
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>