[asterisk-users] Incoming and Outgoing zaptel configuration : ISDN30e

[Rory Campbell-Lange]

On 16/08/07, Steve Davies (davies147 at gmail.com) wrote:
> On 8/16/07, Rory Campbell-Lange <rory at campbell-lange.net> wrote:
... 
>   channel => 1-15,17-31
> Is telling Asterisk that you have 30 active channels. Change it to:
>   channel => 1-15,17-25
> 
> And you should be sorted.

On 16/08/07, Julian Lyndon-Smith (asterisk at dotr.com) wrote:
> Rory Campbell-Lange wrote:
> > We are trying to configure a Sangoma A101 card to allow both incoming
> > and outgoing calls on a UK (BT) ISDN30e line with only 24 channels
> > enabled.
> > 
> > At present incoming calls work fine. We can't call out -- we get a
> > BUSY/CONGESTED error.
> 
> What is your dialling plan command for outbound calls ?

> > Do we need another context in our zapata.conf? In other words, do we
> > need to reserve, say, channels 17-24 for outgoing calls? I also wonder
> 
> I think that your
> 
> channel => 1-15,17-31
> 
> should be
> 
> channel => 1-15,17-25

We'll try that, thanks for the suggestions.

We have already found that we can now make incoming and outgoing calls
with 

    pridialplan=unknown
    prilocaldialplan=unknown

But there is no sound carrying across the line.

Regards
Rory

-- 
Rory Campbell-Lange
Campbell-Lange Workshop Ltd.
<rory at campbell-lange.net>
<www.campbell-lange.net>