[asterisk-users] PRI Question

[Forrest Beck]

You can eliminate the set CallerID line.  This will just set the
variable back to itself.  Asterisk will pass the callerid from one
span to the next.

You can use a GotoIF to set the callerid to something else if it is
blank or marked as Private:

exten => s,1,GoToIf($["${CALLERID(num)}" = ""]?2:3)
exten => s,2,Set(CALLERID(num)=0000000000)


If the CallerID number is blank go to 2 else go to 3.

I wonder if asterisk or the norstar system is holdng on to that last
callerid number on the channel?

The only time you may want to set callerid is when your Norstar dials
out through Asterisk:

[norstar]
; This context is where all incoming calls from the norstar are placed
; Basically take the call from the norstar and bridge it over to the first
; available line on the bottom of the T1 going to TimeWarner.
exten => _1900XXXXXXX,1,Playback(cannot-complete-as-dialed)
exten => _1900XXXXXXX,2,Hangup()
exten => _1X.,1,GoToIf($["${CALLERID(num)}" = ""]?2:3)
exten => _1X.,2,Set(CALLERID(num)=5155551212)
exten => _1X.,3,NoOp(${CALLERID(num)})
exten => _1X.,4,Dial(${PRITRUNK}/${EXTEN},300,tD())
exten => _1X.,5,Hangup()
exten => _X.,1,GoToIf($["${CALLERID(num)}" = ""]?2:3)
exten => _X.,2,Set(CALLERID(num)=5155551212)
exten => _X.,3,NoOp(${CALLERID(num)})
exten => _X.,4,Dial(${PRITRUNK}/${EXTEN},300,)
exten => _X.,5,Hangup()
exten => i,1,Answer()
exten => i,n,Wait(1)
exten => i,n,Playback(cannot-complete-as-dialed)
exten => i,n,Playback(please-contact-tech-supt)
exten => i,n,Hangup()




On 8/9/07, Mike Lynchfield <theclubvoip at gmail.com> wrote:
> hmm from what i have seen this is not supposed to be.. the info is still
> there but should not be used in case of privacy..
>
> zap show channels always show last info till a span refresh.. but the
> privacy should indeed replace those with Privacy.
>
> Maybe it could be a bug ,
>
>
> On 8/9/07, Jeremy Mann <jmann at txhmg.com> wrote:
> >
> >
> >
> >
> >
> > I have a 2 port T1 card doing PRI passthrough, Span 1 answers from Telco,
> Span 2 sends to my existing phone system(Nortel).
> >
> >
> >
> > My Span1 gets sent to the context from-pri, detailed here:
> >
> >
> >
> > [from-pri]
> >
> > exten => _49XX,1,Set(CALLERID(all)=${CALLERID(all)})
> >
> > exten => _49XX,2,Dial(Zap/g2/${EXTEN},,twk)
> >
> > exten => _49XX,3,Congestion()
> >
> > exten => _49XX,4,Set(CALLERID(all)="")
> >
> > exten => _49XX,5,Hangup()
> >
> > exten => _49XX,103,Congestion()
> >
> > exten => _49XX,104,Set(CALLERID(all)="")
> >
> > exten => _49XX,105,Hangup()
> >
> >
> >
> > exten => h,1,Set(CALLERID(all)="")
> >
> > exten => h,2,Hangup()
> >
> >
> >
> > I'm receiving caller ID fine, and setting it on the outgoing channel the
> same I received it, is my logic above wrong?  Will Asterisk natively pass
> through the caller ID, or is there a better way to set it?
> >
> >
> >
> > The reason I ask, is that calls that are not coming in with CLID(blocked
> or private) are showing up as the same number that was previously answered
> on that channel.
> >
> >
> >
> > Thanks.
> >
> >
> >
> > Using Asterisk 1.4 FYI.
> >
> >
> >
> >
> > ________________________________
>  This e-mail, facsimile, or letter and any files or attachments transmitted
> with it contains information that is confidential and privileged. This
> information is intended only for the use of the individual(s) and
> entity(ies) to whom it is addressed. If you are the intended recipient,
> further disclosures are prohibited without proper authorization. If you are
> not the intended recipient, any disclosure, copying, printing, or use of
> this information is strictly prohibited and possibly a violation of federal
> or state law and regulations. If you have received this information in
> error, please notify Texas Health Management Group immediately at
> 1-817-310-4999. Texas Health Management Group, its subsidiaries, and
> affiliates hereby claim all applicable privileges related to this
> information.
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
>
> --
> Mike
> Sales Manager
> http://www.voicemeup.com
> Making it happen
> 1.877.807.VOIP (8647)
> 1.514.312.7030
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
***
Forrest Beck
IAXTEL: 17002871718
jonforrest.beck at gmail.com
http://www.shift8.biz