[asterisk-users] asterisk and telewell isdn hfc problem

[Tzafrir Cohen]

On Sun, Aug 12, 2007 at 12:10:50PM +0300, Giedrius Augys wrote:
> 2007/8/12, Tzafrir Cohen <tzafrir.cohen at xorcom.com>:

> > Are the spans actually up?
> >
> > What is the ouput of:
> >
> >   pri show span 1
> >   pri show span 2
>
> This is more information, I think it helps you:
> 
> pbx*CLI> pri show span 1
> Primary D-channel: 3
> Status: Provisioned, Up, Active
> Switchtype: EuroISDN
> Type: Network (PtMP)
> Overlap Dial: 0
> T200 Timer: 1000
> T203 Timer: 10000
> T305 Timer: 30000
> T308 Timer: 4000
> T313 Timer: 4000
> N200 Counter: 3
> 
> 
> pbx*CLI> pri show span 2
> Primary D-channel: 6
> Status: Provisioned, Down, Active
> Switchtype: EuroISDN
> Type: CPE (PtMP)
> Window Length: 0/7
> Sentrej: 0
> SolicitFbit: 0
> Retrans: 0
> Busy: 0
> Overlap Dial: 0
> T200 Timer: 1000
> T203 Timer: 10000
> T305 Timer: 30000
> T308 Timer: 4000
> T313 Timer: 4000
> N200 Counter: 3
> 
> 
> 
> pbx:/etc/asterisk# cat /proc/zaptel/*
> Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [NT] layer 1 ACTIVATED (G3)" AMI/CCS
> 
>            1 ZTHFC1/0/1 Clear (In use)
>            2 ZTHFC1/0/2 Clear (In use)
>            3 ZTHFC1/0/3 HDLCFCS (In use)
> Span 2: ZTHFC2 "HFC-S PCI A ISDN card 1 [TE] layer 1 DEACTIVATED (F5)"
> AMI/CCS
> 
>            4 ZTHFC2/0/1 Clear (In use)
>            5 ZTHFC2/0/2 Clear (In use)
>            6 ZTHFC2/0/3 HDLCFCS (In use)

Layer 1 activated on the NT port but deactivated on the NT port. Hmmm...
what cable do you use between the two?

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir