[asterisk-users] asterisk and telewell isdn hfc problem

[Tzafrir Cohen]

On Sun, Aug 12, 2007 at 02:07:15AM +0300, Giedrius Augys wrote:
> Hi,
>  I have debian etch 4.0 machine (2.6.18) with two TW-ISDN PCI (Hfc) cards. I
> use bristuff-0.3.0-PRE-1y-e (asterisk-1.2.17,libpri-1.2.4,zaptel-1.2.16). I
> also have patched zaphfc with zaphfc_0.4.0-test1_florz-13.diff.gz  (I load
> module: insmod /usr/src/bristuff-0.3.0-PRE-1y-e/zaphfc/zaphfc.ko modes=1
> debug=1).   So i want to test two cards and make loop between them. So one
> card would be NT, another TE. My configurations:
> /etc/zaptel.conf:
> 
> loadzone=lt
> defaultzone=lt
> span=1,1,3,ccs,ami
> bchan=1-2
> dchan=3
> span=2,0,3,ccs,ami
> bchan=4-5
> dchan=6
> 
> /etc/asterisk/zapata.conf
> [channels]
> 
> switchtype = euroisdn
> ; p2mp NT mode
> signalling = bri_net_ptmp
> 
> echocancel=yes
> echotraining = 100
> echocancelwhenbridged=yes
> 
> immediate=yes
> group = 1
> context=from-internal
> channel => 1-2
> 
> signalling = bri_cpe_ptmp
> group = 2
> context=from-internal
> channel => 4-5

Are the spans actually up?

What is the ouput of:

  pri show span 1
  pri show span 2

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir